Which Dillon case feeder for amp mate?

[DngBat7]

Wondering which model Dillon case feeder for the amp mate II. Which internal shell plate for ppc?

I know Hornady makes one to that works, but I prefer to stick with the dillon

thank you

 

[DngBat7]

Tt

 

[Jdne5b]

The Dillon 650/750 case feeder and large rifle plate should be what you want.

I don't know why the 550 case feeder wouldn't work, but I don't have one so I'm not quite sure on that one.

 

[DngBat7]

The Dillon 650/750 case feeder and large rifle plate should be what you want.

I don't know why the 550 case feeder wouldn't work, but I don't have one so I'm not quite sure on that one.

Great. Thank You

 

[Hoser]

Any of the Dillon 650/750/1050/1100 casefeeders will work fine.

I am actually using an older style casefeeder instead of the new variable speed version. The motor is much quieter.

I am using the small rifle plate for my 6 Grendel.

 

[DngBat7]

Is the variable speed necessary for this application? And are you saying your Verizon is quieter? Or the newer ones?

 

[Jdne5b]

The variable speed isn't needed but I think that's all they sell now unless you find some new old stock somewhere. I have both and either work. The amp mate isn't fast enough that you need the speed of the new feeders either.. but again. The new one is all I can find available.

If Hoser is using small rifle for Grendel then that may be the one to use for PPC. I wasn't sure if the slots were big enough.

 

[Hoser]

Is the variable speed necessary for this application? And are you saying your Verizon is quieter? Or the newer ones?

The older two speed casefeeder is fine. You dont need a lot of speed to keep up. In fact I run mine on slow and it does fine.

But a new variable speed one will work prefect also. Just a touch noisy compared to the old one.