What is the best Decapping Only Tool

[rkittine]

Great time to sit and decap lots of brass before cleaning and reloading. What is everyone's favorite easy to use all in one tool?

Bob

 

[mikecr]

https://www.neiljones.com/html/decapping_tool.html

 

[ashiha]

I like this one:
https://www.amazon.com/dp/B00RPABDZO/?tag=accuratescom-20

 

[rkittine]

Thank you. I was wondering if anyone had experience with the Franklin tool as I have some many different calibers to decap and the universal collet seemed like a great feature.

 

[Richard Coody]

Personally i use.this one to deprime at the range.

https://harveydeprimer.com/

Now i have a lee universal in a.partner press mounted to a picnic table in the back yard i use when I am home. Use the redding universal for small pin cases with the partner.

 

[sqrlgtr]

Another vote for the "harvey deprimer".

 

[R.Morehouse]

I use the Neil Jones tool mentioned above on my 6ppc brass. It has done countless cycles and I never have an issue.

Regards
Rick

 

[memilanuk]

Another +1 for the Harvey... from .223 Rem thru .338LM (at least).

 

[Hohn]

I use the Lee universal and have no problems. But I don't presently run any small flash hole brass either. I'll probably just turn down the pin when/if I do.

 

[Mark W]

I use a lee universal decapping die without complaint. I did have to turn down the pin for the small flash hole in my 6BR brass.

A friend of mine uses that frankfort arsenal tool that @ashiha posted above and he absolutely loves it.

 

[Dub]

I use the Neil Jones tool (s) for all my depriming
One great benefit is I can feel loose primers

 

[DHuffman]

I like this one:
https://www.amazon.com/dp/B00RPABDZO/?tag=accuratescom-20

Me too! Handy tool keeps all the crud in the tool!

 

[Ccrider]

I bought the Harvey and Frankfort tools at the same time. I sent the Frankfort back. Use the Harvey regularly.

I also have the Lee tool and use it when at the press. I had to turn down the punch for small primer usage.

 

[skiutah02]

Another one for the Harvey. Great tool. Probably don't have 100,000 rounds through it. But, that's probably. Drew

 

[afret]

This one works really well. I used the Lee recapping die before on my Forster Co-Ax and every few times the edge of the die would hit and dent the mouth of the brass. Doesn't happen with the FW.

 

[Sniper338]

21st century

 

[rkittine]

Thanks All - Harvey won out and I have ordered one.

Bob

 

[jepp2]

Another +1 for the Harvey... from .223 Rem thru .338LM (at least).

Actually does the 20 calibers as well.

 

[Gabe22BR]

I use the Redding decapper w/ 17/20 cal rod installed...

 

[sqrlgtr]

Thanks All - Harvey won out and I have ordered one.

Bob

Dont think you will be disappointed with it.Its so easy a Benchrest shooter can do it .