Harrell`s Brake Question

[Phil]

On a heavy varmint barrel .900 muzzle, is the 1" brake, 3/4" 32tpi. the one to get???


I can`t remember what I used last time............................

Phil.

 

[Preacher]

That will work for you...

 

[Phil]

Thanks Bruce, I kind of thought I was on the right track here, just needed a confirmation...


Phil.

 

[carlsbad]

Why not go with 24tpi? The finer the threads the less margin of error you have in timing it. --Jerry

 

[Phil]

Why not go with 24tpi? The finer the threads the less margin of error you have in timing it. --Jerry

Jerry,

I`m using the radial brake, so timing isn`t as important, to me.....

Last time i checked 32 tpi. was finer than 24 tpi......

Phil.

 

[JRS]

Jerry,

I`m using the radial brake, so timing isn`t as important, to me.....

Last time i checked 32 tpi. was finer than 24 tpi......

Phil.

 

[carlsbad]

Jerry,

I`m using the radial brake, so timing isn`t as important, to me.....

Last time i checked 32 tpi. was finer than 24 tpi......

Phil.

I guess my double negative wasn't clear, finer threads = less margin for error = less good.

coarser threads = more margin for error = gooder.

Jerry

 

[Phil]

I guess my double negative wasn't clear, finer threads = less margin for error = less good.

coarser threads = more margin for error = gooder.

Jerry

No blood , No Foul.........

 

[Alex Wheeler]

I guess my double negative wasn't clear, finer threads = less margin for error = less good.

coarser threads = more margin for error = gooder

Jerry

Ya, timing and 32tpi brake can suck haha.