6mm Dasher Loads

[savagedasher]

Larry what length barrels are you using?

29.5 to30 3/4 works with all .

 

[JamesnTN]

29.5 to30 3/4 works with all .

Thanks I tried the H4350 in 28" barrels and found it just didn't work as well as my 30" barrels.

 

[savagedasher]

Thanks I tried the H4350 in 28" barrels and found it just didn't work as well as my 30" barrels.

How many GR are you using? I asume your not using a tuner. Larry

 

[JamesnTN]

35.8-36.0 with a 130 FB no Tuner

 

[JamesnTN]

I run 36.6 with Hybrids jumped .020 with that you must use a long drop tube and a slow pour. Larry

I haven't tried the hybrids in my HG it shines with the 108 BT and I know all about that long drop tube and slow pours, if not you'll have powder up into the necks.

 

[bootlaceb]

If I used 32.4gr Varget, CCI 400's and a 108 BT. What should I come down to if using a CCI 450 primer?

 

[NC308]

If I used 32.4gr Varget, CCI 400's and a 108 BT. What should I come down to if using a CCI 450 primer?

Personally I would not come down any. I'm shooting almost a grain more than that with cci 450's with no pressure. BUT this might not be your case! So you can drop back to 32.0 and work back up but I bet you want have any problems.

 

[savagedasher]

Or try different primers, Fed. match, CCI BR 4

I try every primer. But I try to get the lowest ES possible . Larry

 

[Terry Altom]

James / Larry,

Have you tried RL-16 in your Dasher?

 

[savagedasher]

James / Larry,

Have you tried RL-16 in your Dasher?

No What is the case fill I like over 103 full . Never have got my Es down without it . Larry

 

[Terry Altom]

Not sure yet. After reading Donovan's report I picked up a pound to try since I cannot get H4350 these days.

http://forum.accurateshooter.com/threads/alliant-reloader-16.3905416/

 

[savagedasher]

Not sure yet. After reading Donovan's report I picked up a pound to try since I cannot get H4350 these days.

http://forum.accurateshooter.com/threads/alliant-reloader-16.3905416/

You and many others . Larry

 

[Terry Altom]

I did manage to get 16 lbs off H4831(sc) hoping that he's well in my 260AI

 

[JamesnTN]

I haven't seen any on the shelves

 

[savagedasher]

I haven't seen any on the shelves

The last I got was a year ago but that 80 pounds . It was at the last gun show but in one pounds Larry

 

[savagedasher]

Pulled 16 up on QL Z1 and Pm looked okay pressure that I shoot it fills the case too full and the 95 percent of bullet speed is only 10"
Nothing I would want . Larry

 

[JamesnTN]

The last I got was a year ago but that 80 pounds . It was at the last gun show but in one pounds Larry

What powder are we talking about?

For me I'm talking RL16 that I've not seen any on the shelves.

 

[savagedasher]

What powder are we talking about?

For me I'm talking RL16 that I've not seen any on the shelves.

4350 I have plenty .16 is nothing I want to try Larry

 

[Terry Altom]

Pulled 16 up on QL Z1 and Pm looked okay pressure that I shoot it fills the case too full and the 95 percent of bullet speed is only 10"
Nothing I would want . Larry

How does that compare with the numbers from H4350?

 

[savagedasher]

How does that compare with the numbers from H4350?

Looks the same as N550 for speed but 550 burns down the barrel further . Should be hard on the chamber . Larry