Its a .308 tikka t3 with a brux barrel in a boyds pro varmint. The scope is just a vortex. Its for sale if you want it, I'm a recoil wimp
http://forum.accurateshooter.com/threads/wts-tikka-t3.3901723/#post-36793903
Show Off Your S.O.B. Rifle
- Thread starter JayCutright
- Start date
Its a .308 tikka t3 with a brux barrel in a boyds pro varmint. The scope is just a vortex. Its for sale if you want it, I'm a recoil wimp
http://forum.accurateshooter.com/threads/wts-tikka-t3.3901723/#post-36793903
powderbrake
Gold $$ Contributor
Here is my new prairie dog rifle. It is a Stiller Predator V action, single shot, right bolt, left port, in 6mmBR. 28" Krieger #18 contour, 1:8 twist barrel, .271 no turn neck. Macmillan A3 stock with adjustable cheekpiece, pillar bedded, Jewell trigger, 20MOA rail, Nightforce rings and Nightforce 8-32X NXS scope.
Here's a couple pics, plus a link to other pics I took on my prairie dog hunt.
Here is a 3 shot group. 88 gr Berger Varmint, 31,7 gr Varget, CCI Br4 primer, 3091fps. Those are 1/4 inch squares.
here is the link to the other pics:
http://forum.accurateshooter.com/th...og-hunt-with-new-rifle-and-new-bench.3903853/
Here's a couple pics, plus a link to other pics I took on my prairie dog hunt.
Here is a 3 shot group. 88 gr Berger Varmint, 31,7 gr Varget, CCI Br4 primer, 3091fps. Those are 1/4 inch squares.
here is the link to the other pics:
http://forum.accurateshooter.com/th...og-hunt-with-new-rifle-and-new-bench.3903853/
No Thanks just thought it was cool looking..Its a .308 tikka t3 with a brux barrel in a boyds pro varmint. The scope is just a vortex. Its for sale if you want it, I'm a recoil wimp
http://forum.accurateshooter.com/threads/wts-tikka-t3.3901723/#post-36793903
The bottom one is the 284 right..man I like that one
Phil
Gold $$ Contributor
little something I had T Claunch put together for me just to prove to myself I could hit a 10 inch plate at 1,000 yards with a receiver sight,and it works,,
Rem 700PSS action with Gre-tan bolt work
AICS 1.5 chassis with the Atlas spigot mount bipod
Bartlien 8 twist 5R 6.5x47L
Mo`s fron sight with 22mm Gehmann 4.0-6.0mm front with 0.75 diopter
Champions Choice rear base with PNW sight with Gehmann iris
also can switch over to the 8-32 SIII scope in Barrett EX rings that will zero from 25 to past a mile with the help of the adjustable Barrett rings
I shoot a stiff load of H4350 and 130 VLDs at 3,000 fps
Rem 700PSS action with Gre-tan bolt work
AICS 1.5 chassis with the Atlas spigot mount bipod
Bartlien 8 twist 5R 6.5x47L
Mo`s fron sight with 22mm Gehmann 4.0-6.0mm front with 0.75 diopter
Champions Choice rear base with PNW sight with Gehmann iris
also can switch over to the 8-32 SIII scope in Barrett EX rings that will zero from 25 to past a mile with the help of the adjustable Barrett rings
I shoot a stiff load of H4350 and 130 VLDs at 3,000 fps
another rifle Tim did the metal work on and I did the stock work myself,,
Stiller Tac 30 Action with a single shot follower bedded to the Shehane ST1000-F stock so when I remove the bbl action it can be put in another stock as a repeater,,
the Jewell trigger on this rifle has a safety and the light spring at 1.7 ounces
barrel is a fat Brux 1.250 taper to 1.100 .236 bore 8 twist 28 inches long chambered in the 6mm BR-DX
it shoots the 104 BIBs pretty well
bottom target is 625 yards
Stiller Tac 30 Action with a single shot follower bedded to the Shehane ST1000-F stock so when I remove the bbl action it can be put in another stock as a repeater,,
the Jewell trigger on this rifle has a safety and the light spring at 1.7 ounces
barrel is a fat Brux 1.250 taper to 1.100 .236 bore 8 twist 28 inches long chambered in the 6mm BR-DX
it shoots the 104 BIBs pretty well
bottom target is 625 yards
he is doing me a 13.5 twist Krieger zero freebore 6BR for that blue stocked Stiller in the next week or 2,,I hope to shoot it at Gallatin on Aug 6th at UBR match,,
what I been shooting the most lately
Terry Leonard stock with glued in Farley RB,LP,RE with T Claunch chambered .237 12 twist Krieger HV 24 inch .268 neck 6mm PPC with a 35xLCS that the Ackermans shop installed a raised super fine crosshair,,it shoots better than I can read conditions for sure,
and with an 8 twist .236 Bartlien 28 inch 6BR chambered by Dan Dowling that came with rifle when I bought it,,
Terry Leonard stock with glued in Farley RB,LP,RE with T Claunch chambered .237 12 twist Krieger HV 24 inch .268 neck 6mm PPC with a 35xLCS that the Ackermans shop installed a raised super fine crosshair,,it shoots better than I can read conditions for sure,
and with an 8 twist .236 Bartlien 28 inch 6BR chambered by Dan Dowling that came with rifle when I bought it,,
man that is Bad Azz in the 300 WM,,,I been thinkin about swapping my AICS for a Manners T4
My other 6 Creed, also built by Chad Dixon back in 2012 and some of the groups it shot at last Sundays 600BR Match, that flyer in the bottom target, my fault, cost me 3rd place. 
[
[URL='http://imgur.com/1xnitnP']
[/URL]
[[URL='http://imgur.com/1xnitnP']
Thanks! Have another one just like it coming soon, sans bottom metal.
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.