WTB action truing fixture

[Cottonfield Customs]

As the title says I was wanting to find one someone didn’t need anymore. Thanks in advance.

 

[shortgrass]

Why not make what you want, yourself?

 

[rgc54]

As the title says I was wanting to find one someone didn’t need anymore. Thanks in advance.

Two pieces of steel tubing some lathe time, then a little drilling, threading and milling. And you will have one. Plus the machine time experience. (The part I like the most)

 

[GenePoole]

Easy peasy:

 

[hoz53]

As the title says I was wanting to find one someone didn’t need anymore. Thanks in advance.

if you dont want to make one you might have better luck advertising in the classifieds

 

[Dusty Stevens]

Or just make an order with the viper and call it done

 

[The Viper]

Here is another offer to any member of this site. The Viper 3 in 1 chambering, bolt truing and action truing fixture for $200.00 + priority mail postage. That's $65.00 off the retail price. This time $10.00 of each sale will go directly to the forum boss to help support this site.

Do Not message me. I don't check it all the time. Please call 1-269-521-3671

 

[hoz53]

Or just make an order with the viper and call it done

That’s an even better idea

 

[Dusty Stevens]

Here is another offer to any member of this site. The Viper 3 in 1 chambering, bolt truing and action truing fixture for $200.00 + priority mail postage. That's $65.00 off the retail price. This time $10.00 of each sale will go directly to the forum boss to help support this site.

Do Not message me. I don't check it all the time. Please call 1-269-521-3671

Thank you mr viper. You are a class act for sure

 

[ND shooter]

Thank you mr viper. You are a class act for sure

Agree!!! Just recently bought one of his barrel vises. Very nice and a work of art. A steal for the price! Thanks again Bob.

 

[Cottonfield Customs]

Just saw this post and will be making a call tomorrow.

 

[carlsbad]

Easy to make and quite costly effective if your time is free. If you're running a business, your time isn't free so I understand why the OP wants to buy one. I buy a lot of things now that if time were free I could make.

 

[shortgrass]

Easy to make and quite costly effective if your time is free. If you're running a business, your time isn't free so I understand why the OP wants to buy one. I buy a lot of things now that if time were free I could make.

I have found that when the clock reaches a certain hour, the time after that is mine! If you make yourself a 'slave' to your customers you will burn out. I limit how much work I take in or give the customer an honest lead time so I have time for the things I want to do. After all, 'time' is the most precious commodity each of us has, and no one is going to give you more! A good action truing jig shouldn't take an hour to make on manual machinery.

 

[The Viper]

I have found that when the clock reaches a certain hour, the time after that is mine! If you make yourself a 'slave' to your customers you will burn out. I limit how much work I take in or give the customer an honest lead time so I have time for the things I want to do. After all, 'time' is the most precious commodity each of us has, and no one is going to give you more! A good action truing jig shouldn't take an hour to make on manual machinery.

Dear Mr. Shortgrass, If you can produce my fixture in under an hour, on a manual lathe and manual mill, I will buy them from you. Please advise asap. with price per piece.

With Best Regards,
Bob Pastor

 

[shortgrass]

Dear Mr. Shortgrass, If you can produce my fixture in under an hour, on a manual lathe and manual mill, I will buy them from you. Please advise asap. with price per piece.

With Best Regards,
Bob Pastor

Just who said it has to be like yours'?! There is more than one way to skin most cats.

 

[Dusty Stevens]

Dear Mr. Shortgrass, If you can produce my fixture in under an hour, on a manual lathe and manual mill, I will buy them from you. Please advise asap. with price per piece.

With Best Regards,
Bob Pastor

One suggestion- make the end round instead of 4 flats. I had to turn mine down so i could use it in a 3 jaw.

 

[akajun]

I made my own on a manual lathe and mill
$75 for the aluminum and about 2-3 hrs time plus $15 bucks for the set screws
Yeah if I needed another I’d buy one from viper, even at full price

 

[Cottonfield Customs]

Thanks to the Viper. The fixture is top notch and speaking with you on the phone was cool also. Thanks again.

 

[The Viper]

Thanks to the Viper. The fixture is top notch and speaking with you on the phone was cool also. Thanks again.

I'm glad it got there safe and sound. If there is anything else I can help you with just let me know.

 

[McStocks]

This is an old post, but a friend is making noises about selling his (with a bunch of other shootin' stuff), so if someone wants one, let me know!
steve@mcgeestocks.com