Looking at the micrometer seater for the 30br.. It looks like a person still uses the set screw on the stem. Is that correct?? Or can you fine tune by just turning the micrometer??
Kelly
Kelly
wilson micrometer seater
- Thread starter tootalloutdoors
- Start date
Forum Boss
Administrator
The set screw is just for gross adjustment of the seating stem length. I personally set it so the micrometer is near the zero mark for my longest-loaded bullets.
Then you can screw down the micrometer to adjust seating depth. Sometimes, if there is an extreme difference between one bullet type and another, you might have to re-adjust the stem, but normally you make all your adjustments with the indexed micrometer top.
Then you can screw down the micrometer to adjust seating depth. Sometimes, if there is an extreme difference between one bullet type and another, you might have to re-adjust the stem, but normally you make all your adjustments with the indexed micrometer top.
O.K. I just called and actually ordered the Sinclair micrometer that will convert the old style to the micro..
Kelly
Kelly
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.