Widden Bushings in Redding ?

[Liven The Dream]

I picked up a used Redding Bushing Die. Much to my surprise the Body was the only part Redding !
The Decapping Stem Assembly and Bushing are Widden with parts missing as I have Widden Dies.

Has anyone used Widden Bushings in Redding Dies ?

Thanks,
Don

 

[BoydAllen]

Wilson, Widden, Redding, and RCBS bushings are all interchangeable. There are probably others that do not come to mind.

 

[Liven The Dream]

Wilson, Widden, Redding, and RCBS bushings are all interchangeable. There are probably others that do not come to mind.

Boyd Thanks .

 

[TrxR]

I believe Hornady bushings will even work but are a little taller?

Someone please correct me if im wrong.

 

[RegionRat]

I've had no problem with the Whidden parts going back and forth to Redding in 5.56mm, 6mm, and 7.62mm.

 

[Liven The Dream]

I've had no problem with the Whidden parts going back and forth to Redding in 5.56mm, 6mm, and 7.62mm.

Thanks , got a reply from Widden said it’s OK

 

[jimmymac]

I had an issue with a Whidden bushing in a 220 Beggs die made by Hornady. I couldn't get the Whidden bushing to float in the die because the Whidden bushing was slightly longer than the Wilson I typically use. I feel like this is more a problem with the die than the bushing, but this particular combo did not play nice together. Trust but verify.

 

[Chuckhunter]

I do know that the Whidden bushings work fine in a Harrell's die.

 

[Liven The Dream]

I had an issue with a Whidden bushing in a 220 Beggs die made by Hornady. I couldn't get the Whidden bushing to float in the die because the Whidden bushing was slightly longer than the Wilson I typically use. I feel like this is more a problem with the die than the bushing, but this particular combo did not play nice together. Trust but verify.

Good point , will do . I was lucky to find a Stem Assembly at Graff's. This Die is not listed in many Sites.
I called Redding and they gave me the only one showing in stock.