• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

who makes the smallest 300 wsm die (base size)

so we may have a winner.
i sized some brass with the wilson die and i like the bolt closing.
i will fire some brass tomorrow and try again.....very close
 
Your sticking a WSM 2.10" case in a die for a RUM 2.85 case. Do you really think that the die is going to touch the shoulders.
the dia of the case is SMALLER AS YOU GET UP.... and if you read i propably solved the isse with a new 300 wsm die
 
so brass fired in the fire forming gun, and then sized with the wilson die is pretty good.
i would like less shoulder set back, but it does work about 1 thou under breech and maybe 3 or so on set back.
may call wilson and see if there is an easy fix.
if i bump back only 2..the bolt will not close
maybe my numbers are off on the setback and actually the world is good
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,290
Messages
2,215,677
Members
79,516
Latest member
delta3
Back
Top