Who has a kelbly Atlas with a coned bolt??

[skeetlee]

I need a measurement from a barrel that has been professionally fitted to a kelbly atlas with a coned 308 bolt face bolt. My notes are a little confusing, so id like to send my measuring tool to you for a quick measurement please. can anyone help? thanks Lee

 

[expiper]

OP,,,Im shure you know that the recoil lug thickness can be a cupla diffent ### or non existant,,,it can be configured to use typical Panda dims,,,,(or not).,...Roger

 

[Dusty Stevens]

http://www.kelbly.com/actions-steel-tacticalatlas.html

Dimensions on that page

 

[Clavius-Walker]

If you're wondering if you can use a spacer to use a Panda barrel, yeah, it works, works well.

 

[skeetlee]

What I need is the depth of cone. I have two numbers wrote down in my log and I don't recall why. I have a 30* steel cone insert that I measure depth with when I don't have an action in hand. I need the measurments from top of my cone tool to the shoulder of the tenon. I can simply mail my cone insert to whomever can help. A site measurment and I'll be set. Thanks lee

 

[expiper]

What I need is the depth of cone. I have two numbers wrote down in my log and I don't recall why. I have a 30* steel cone insert that I measure depth with when I don't have an action in hand. I need the measurments from top of my cone tool to the shoulder of the tenon. I can simply mail my cone insert to whomever can help. A site measurment and I'll be set. Thanks lee

Op,,,there is no need to complicate it with xtra tools or gizmos,,,,just do the machine work to Kelbly's specs and it WILL work,,,,the only change would be if you use a recoil lug of different dims. than on the website,,,you can do the math,,,Roger

 

[Dusty Stevens]

When you back off that .135 it leaves a perfect .010 gap on the boltface. Everything else is pretty straightforward

 

[Eddie Harren]

Simply amazing!

 

[skeetlee]

for sure!!!