Which Seekins Rings ?

[BigOhTX]

I need to know what Height would be optimal for a new hunting setup I'm putting together?
I need 30mm rings for a Factory Model 700 5R 6.5 cm with HS stock With heavy contour fluted barrel...
Mounting A Nightforce SHV 5-20X56... Will the .92" work ? It Has .0moa Pic base installed already..

 

[Sandstorm]

The 56 bell may give you issues..or its close. I used the Seekins High rings for my
10-50x60 Sightron. I think they were 1.4 high on a 20 Moa rail.
I would check with others here as my application does'nt exactly match yours.

 

[BigOhTX]

I have have another Similar Setup with the same scope..
Non fluted i believe is the only difference.. But i can't determine which size Nightforce rings i used..?
Or really just cant remember.. Thank you for your input..

 

[Kracken McGraw]

You will need to go with the high .97 with the 56 objective. The med-high .92 will clear probably but you might not get scopes caps to clear and you won’t be happy. This is based on my experience.

 

[BigOhTX]

Perfect, that's the response i needed...
Thank You Sir...