Which Powder Dispenser

[500Stroker]

Who makes a mechanical (non digital) powder dump that does not cut extruded powder?
I load Varget for a 6BRX and a Dasher and need a better dispenser than my old RCBS.
Thanks in advance

 

[savagedasher]

Get Lee Larry

 

[BillPa]

Who makes a mechanical (non digital) powder dump that does not cut extruded powder?

Johnson's Quick-Measure, Lee Perfect or Classic.
Bill

 

[brian427cobra]

Gen 2 Prometheus

 

[dickn52]

Lee Classic retains the setting for me.

 

[bozo699]

Who makes a mechanical (non digital) powder dump that does not cut extruded powder?
I load Varget for a 6BRX and a Dasher and need a better dispenser than my old RCBS.
Thanks in advance

I have loaded 6brx 6brdx and dasher fire form loads with Varget from a Lyman #55 and a Harrell's powder dispensers and they work fine,.....there are tricks to using them. consistency is the key. The best at explaining it I have heard was from Boyd Allen he is a member on this forum you might send him a p.m
Wayne.

 

[normmatzen]

What SavageDasher said!
I have a fancy mod.3 micrometer dispenser and a Lee plastic cheapie.
After loading with the Mod 3 for 2-3 years I tried the plastic, cheap Lee. Now, that is my dispenser. Way better consistency in load weight and no cutting of granules!
I dispense to a lab balance so I like a charge very close to the final weight to minimize dribbling. The Lee does it.
I thought about buying one of the new metal LEE dispensers, but I figured,"why?" The cheapie works reliably.