Tom, those are some real beauties right there!Five days in and no pictures.
I realize I can't switch barrels with a screwdriver. We all have our crosses to bear...Tom
Tom, those are some real beauties right there!Five days in and no pictures.
I realize I can't switch barrels with a screwdriver. We all have our crosses to bear...Tom
Was there much to changing out the trigger spring on it?I got my LH 457 Varmint. So far, I really like it. I put an Area 419 30moa rail on it and an Arken EP5 5-25x56 FFP Mil scope. I also installed a lighter trigger spring on it and have it set at 10 ounces.
I really need to take the barrel off and thread it so I can use the ATS tuner and suppressor on it. Just for kicks, I put one of those rubber Limbsaver tuners on the barrel, and it actually worked pretty good.
![]()
![]()
I shot some 5 shot groups at 50 yards using some 40 gr Wolf Match Target ammo. The first two groups were without the Limbsaver on the barrel.
![]()
The next two groups were with it on the barrel. I pulled one shot, but was impressed what difference that piece of rubber on the barrel made.
![]()
![]()
Was there much to changing out the trigger spring on it?
Ok thanks, I thought I had read where you might have to drive some pins out to drop the trigger out of the housing.It’s fairly simple. Pop a couple of pins out and you’re done.
Ok thanks, I thought I had read where you might have to drive some pins out to drop the trigger out of the housing.
Ok thanks, I thought I had read where you might have to drive some pins out to drop the trigger out of the housing.