Which 30BR dies???

[Treegunner]

I am converting my rifle to a 30BR, I just ordered a Hart barrel, the reamer is a Robinett design with zero freebore and am ready to order dies. I have read a few posts here and am leaning towards Reddng but I am a little unsure on bushings sizes etc. Any suggestions on that die set up or any other brand?

I guess I want to keep it simple and buy off the shelf without customizing. I am reloading on a Dillon 550.

I appreciate any advice,
Thanks in advance.
Jim

 

[Aussie_bob]

I am pretty sure that Redding now make the 30BR "S"type die sets that take the bushings when i did mine i used a 7mmBR "S" type die and had the neck shoulder area honed out to accommodate the 30cal neck turned brass to .010 neck wall thickness so loaded round measures .328" neck as chamber neck is .330" use a .326"/.325" bushing

 

[tightneck]

Harrell's has 30 BR dies in stock I would bet. Everything I've got from them has come very fast including a 30 BR die. The Redding is a great die but the Harrell's will match your chamber perfectly.