• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Where to get Anschutz Rail blanks

ericskennard

FOR several years I have purchased blank Anschutz rails from Champion Shooters in Ohio. I recently placed a Web Order for a few but never received them. Champion Shooters website is down and their phone is disconnected.

So does anyone have a source for T-slot/Anschutz rails?

I know Champions Choice has some but they are twice as much!


ERIC
 
ericskennard said:
FOR several years I have purchased blank Anschutz rails from Champion Shooters in Ohio. I recently placed a Web Order for a few but never received them. Champion Shooters website is down and their phone is disconnected.

So does anyone have a source for T-slot/Anschutz rails?

I know Champions Choice has some but they are twice as much!


ERIC
Click to expand...

These guys have one, but I'm not sure it's exactly what you're looking for.
http://www.nordicmarksman.com/kz-content/images/medium/anschutz-handstop-accessory-rail1601825.jpg

Bill
 
They are not too hard to make, if you have a mill. Plenty of drawings on the 'net. I have just made one the cheap - I just needed to mount a Magic Bi-pod on the front of a rebuilt stock for a project, so made a bit of 1/8 aluminium about 3in. long, stock width and cut a 10mm (.4in) slot and spaced it with 2 pieces of 1/8 ali, keeping the slot clear - 13mm clearance needed, about 1/2 inch. Drilled and wood screwed flush to the timber. Works fine and when polished looks nice on the rifle.
 
NZ_Fclass said:
They are not too hard to make, if you have a mill. Plenty of drawings on the 'net. I have just made one the cheap - I just needed to mount a Magic Bi-pod on the front of a rebuilt stock for a project, so made a bit of 1/8 aluminium about 3in. long, stock width and cut a 10mm (.4in) slot and spaced it with 2 pieces of 1/8 ali, keeping the slot clear - 13mm clearance needed, about 1/2 inch. Drilled and wood screwed flush to the timber. Works fine and when polished looks nice on the rifle.
Click to expand...


I agree, but most on this forum do not have machine tools.
 
I have a brand new 12” anschutz rail as well if needed. Bought new from champions a few years back and never installed.
 
Thanks Butch, I'll keep Neil's info.
Hog, I am going to call McM and see if I can get on a list.
Teele Numrich is out of stock.
Pres I sent you a PM if you want to sell it.
 
ericskennard said:
FOR several years I have purchased blank Anschutz rails from Champion Shooters in Ohio. I recently placed a Web Order for a few but never received them. Champion Shooters website is down and their phone is disconnected.

So does anyone have a source for T-slot/Anschutz rails?

I know Champions Choice has some but they are twice as much!


ERIC
Click to expand...
A few years ago I needed piece of blank Anschutz-type rail. I live in New Zealand, and I got some from N Z gunsmith Mike Collings. I cannot remember what I paid for an 18inch length, but it struck me as being a reasonable price.


http://www.collingsguns.co.nz/index.html#


As I remember, Mike said that he obtains lengths of such rail from somebody in Australia who had an extrusion die specially made for him, and he cuts it to the lengths requested by customers.


It might be worth while for you to contact Mike direct. Even if he is unable to supply you, or if the cost of postage to USA is prohibitive, he may be prepared to give you the contact details of the manufacturer, who may in turn have an outlet in USA.
 
Redrover said:
A few years ago I needed piece of blank Anschutz-type rail. I live in New Zealand, and I got some from N Z gunsmith Mike Collings. I cannot remember what I paid for an 18inch length, but it struck me as being a reasonable price.


http://www.collingsguns.co.nz/index.html#


As I remember, Mike said that he obtains lengths of such rail from somebody in Australia who had an extrusion die specially made for him, and he cuts it to the lengths requested by customers.


It might be worth while for you to contact Mike direct. Even if he is unable to supply you, or if the cost of postage to USA is prohibitive, he may be prepared to give you the contact details of the manufacturer, who may in turn have an outlet in USA.
Click to expand...
http://www.triplej.com.au/
 
The European Anschutz forend rails that were available at Champion Shooters Supply are back,

See www.FreelandsSports.com
freelandssports.com

Anschutz Blank Rail Section 15″ for Target Rifle Stock Accessories - Freeland's Sports LLC

The Anschutz aluminum rail section is designed for Anschutz type accessories used on many European target rifles. The rail is blank and unmodified so you can put marks or screw holes anywhere you want or cut it down to what ever size you need or leave it 15" long.
freelandssports.com freelandssports.com

Please spread the word that the Freeland's Products are now available again even though Champion Shooters Supply is not.
 
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,749
Messages
2,201,517
Members
79,068
Latest member
Nonesuch

Share This Page

Back
Top