Hi all. I’m in the market for a new set of digital/electronic calipers for reloading. From all the research I’ve done, Mitutoyo seems to be a brand that gets high reviews. My question is what specific Mitutoyo model would you guys with a lot of experience recommend for general all-around reloading for magnum rifle cartridges? Thanks.
What Mitutoyo Model is Best...?
- Thread starter Herd_Bull
- Start date
jonbearman
I live in new york state,how unfortunate !
I BOUGHT ONE FROM harbor freight and sent it to metrology at Kodak and they told me how amazed they were at the accuracy so spend a lot or spend a little because verniers are not for making super accurate measurements in the first place.
I keep two Mitutoyo's on the bench. One is digital and the other has a dial. If I could only have one, it would be the Mitutoyo Absolute Digital Caliper (500-196-20). If you use a comparator, it's really easy to zero out the digital display with a push of a button. They switch from standard to metric with a push of a button too. They are super smooth.
Joe R
Gold $$ Contributor
Regardless of which calipers you get be sure to get some pin gauges http://www.amazon.com/gp/product/B0006JCN2S/?tag=accuratescom-20 so you can make sure that your caliper is working properly.
Sooner or later you're going to drop it (I'm a kluz) and you'll be glad you have it. Since I'm not a machinist I also used it to learn how to use the calipers properly to get the right "feel". When you're playing with .001" it is easy to influence the measurement by using a little too much force, just sayin'.
I personally like the 8" calipers because after I attach the bump gauge/comparator it still feels balanced in my hand. The 6" calipers caused my hand to be a little "crowded". YMMV.
I did use the HF models for a couple of years and they worked very well for me. I must be becoming a tool snob because about 3 months ago I upgraded to another brand http://www.amazon.com/dp/B00K3PZVKG/?tag=accuratescom-20 just because it had a better battery and absolute origin. Some of the guys here recommended them and I believe they were correct. For the price of one Mitutoyo I got three of them and still had money left over. Of course I'm not a gunsmith, so I'm not trying to impress anyone .
By the way if you want my HF 8" calipers I'll sell them to you, two pairs for $30 TYD including boxes and docs.
Regards,
Joe
Sooner or later you're going to drop it (I'm a kluz) and you'll be glad you have it. Since I'm not a machinist I also used it to learn how to use the calipers properly to get the right "feel". When you're playing with .001" it is easy to influence the measurement by using a little too much force, just sayin'.
I personally like the 8" calipers because after I attach the bump gauge/comparator it still feels balanced in my hand. The 6" calipers caused my hand to be a little "crowded". YMMV.
I did use the HF models for a couple of years and they worked very well for me. I must be becoming a tool snob because about 3 months ago I upgraded to another brand http://www.amazon.com/dp/B00K3PZVKG/?tag=accuratescom-20 just because it had a better battery and absolute origin. Some of the guys here recommended them and I believe they were correct. For the price of one Mitutoyo I got three of them and still had money left over. Of course I'm not a gunsmith, so I'm not trying to impress anyone .
By the way if you want my HF 8" calipers I'll sell them to you, two pairs for $30 TYD including boxes and docs.
Regards,
Joe
Attachments
Last edited:
Very good point especially with the longer cartridges.
Don't overlook the Fowler calipers.
I have a dial Mitutoyo (made in Brazil, $120), dial Cabela's (made in China, $30) and a digital Harbor Freight (made in China, $10 on sale) and all three of them measure exactly the same. The Mitutoyo is much smoother and if in your shoes and had the money that is what I would buy. If on a budget, the other two will do.
I use bullets to test them. I check the bullet with a micrometer and then compare that reading to what I can do with the calipers.
I use bullets to test them. I check the bullet with a micrometer and then compare that reading to what I can do with the calipers.
FWIW I finally settled on a pair of Browne and Sharpe "Tesa" Twin-Cal digitals. Still use a set of digital "no-name" calipers from Sinclair for routine measurements, but go through batteries quickly because of no auto-off-and there is no comparison in how they "feel" -I get repeatable measurements with the B/S.
tclaunch
Silver $$ Contributor
Its on my bucket list to get myself a set of 0 to 4" calipers and see if they are as handy as I think they will be. I do like digitals for the loading room, ease of zeroing is a plus, but all dials and tumblers at the lathe. I just discovered how nice the Starrett 449 blade depth mics are.
pikespeakgoat
Gold $$ Contributor
I use the both the cheap HF 4" and 6" digital calipers on my loading bench and the smaller size is many times more convenient than the 6" version.... and I don't cuss nearly as much when I misplace or drop the HF tools.
I've had a couple people recommend these as well...
http://www.amazon.com/gp/product/B000R8ZUG4/?tag=accuratescom-20
http://www.amazon.com/gp/product/B000R8ZUG4/?tag=accuratescom-20
I also can recommend the iGaging Absolute Origin calipers as a good "middle ground" for price. I bought this one for $40...
http://www.amazon.com/dp/B00INL0BTS/?tag=accuratescom-20
Based on this video review and comparison test against multiple other calipers including the Mitutoyo.
http://www.amazon.com/dp/B00INL0BTS/?tag=accuratescom-20
Based on this video review and comparison test against multiple other calipers including the Mitutoyo.
Respectfully,
I prefer Etalon out of Switzerland for analog dial calipers. Never been impressed with ANY digital unit if you work with them on a daily basis. Of course the same can be said of Starrett. Jaws are too soft...imho. Etalon is made by TESA which also makes Intrepid, Compaq, & B&S if memory serves. They run them on sale at Enco on a regular basis. Bought two extra pair at $125 per last year...fwiw
Regards, Matt.
I prefer Etalon out of Switzerland for analog dial calipers. Never been impressed with ANY digital unit if you work with them on a daily basis. Of course the same can be said of Starrett. Jaws are too soft...imho. Etalon is made by TESA which also makes Intrepid, Compaq, & B&S if memory serves. They run them on sale at Enco on a regular basis. Bought two extra pair at $125 per last year...fwiw
Regards, Matt.
Alex Wheeler
Site $$ Sponsor
I have a coolant proof Mitu absolute and it is very accurate. I got it because I always have one near and chips or sanding dust was always jamming up my dials. So if you plan to use it in a work place the digitals are nice, in a clean environment the Browne and Sharpe is the best IMO.
Dusty Stevens
Shiner
They are. I quit using my 6" digital mitutoyos last time the battery died and love the 4" mitutoyo set with .200/rev dial. And funny matt mentioned etalon- i still have a 6" etalon caliper that i used when i used calipers for a living. I love em. It is just like a b&s with a roller (same parent co like you said) i also got a 6" mitutoyo black face dial with a ratchet wheel on it. I have a bunch that i hardly use but those 3 are my favorite. you just get attached to certain things and like the way they work i guess
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.