What Full length die are you using ?? 6 Dasher

[varminthunter1]

I`m going to start shooting the 6 Dasher. I`ve been down the road of the 6x47L and the 6BR.
I already have a Wilson seater for the Dasher. What are you using for full length sizing?
I plan on using my Harrels compact press for sizing, and will full length size every time. I will have a tight neck chamber, possibly .267". I have not decided on a custom reamer, or one I have.
Any recommendations?
Jeff

 

[lynn]

Jeff
Get the Redding type "S" with the neck bushing and don't look back.
Lynn

 

[varminthunter1]

I talked to Lynwood Harrell today.
He said the dasher FL die was on his short list of things to do.
He will offer 7 sizes of die, just like the PPC.
I`m debating on whether I should wait for the Harrell`s.
Jeff

 

[K22]

Whatever Dies you decide on, you should consider purchasing a Wilson Case Gauge to adjust your Full Length Sizing Die for proper sizing. One of the most common mistakes in full length sizing is to oversize the case, i.e. pushing the shoulder back too far. This can destroy accuracy, shorten case life and in the worse cases, promote head separation. The Case Gauge can be used to verify that your sizing the case the proper amount.