What ballistic program to use with MOA base?

[RangeMe]

Thank you

 

[Lone Hunter]

Could you help me a bit more with where rhe about button is on how to get ahold of Igor? The StrelokPro app is a bit confusing to me on how do anything but put in data.
thanks in advance.

If on IPhone go to bottom left of page. There is a object that looks like a gear or cog. Click on it. This is your SETTINGS button. Scroll down to bottom of page and you will see
About Strelok Pro. Click it and you will see See Email To Igor Borisov. Click this and send email. He will respond back. Pretty much the same on IPad but Settings Button is on Right side of page. Same Button that looks like a gear or Cog. Play with the App some and you will like it but like anything else it will get you close but verify by shooting.
Remember, Garbage In, Garbage Out. You have to put the right settings in to get the correct outputs. All it is is math.

 

[Newhouse]

I have the CZ457 MTR with 30 MOA base and Vortex PST 6-24x50 zeroed at 50 yds. The ballistic calculator that I use does not have the Vortex. I just select another scope that is on MOA, enter 1.9" for the scope centerline to bore centerline distance in the settings, select the CCI 22LR 40 gr and gives MOA adjustments needed for different distance: 6.84 MOA for 100 yds and 25.85 for 200 yds and I have been using 6.75 and 25.75 MOA since my scope adjustments is .25 MOA. If I select an MRAD scope, ballistic calculator gives 1.99 mils for 100 yds and 7.52 mils for 200 yds. MOA base only come to play with its thickness when measuring the scope to bore centerline distance . The 30 MOA base just basically gave me 30 MOA ( or 30/3.438= 8.726 mils) additional elevation adjustment on my scope for longer range.

 

[RangeMe]

I have the CZ457 MTR with 30 MOA base and Vortex PST 6-24x50 zeroed at 50 yds. The ballistic calculator that I use does not have the Vortex. I just select another scope that is on MOA, enter 1.9" for the scope centerline to bore centerline distance in the settings, select the CCI 22LR 40 gr and gives MOA adjustments needed for different distance: 6.84 MOA for 100 yds and 25.85 for 200 yds and I have been using 6.75 and 25.75 MOA since my scope adjustments is .25 MOA. If I select an MRAD scope, ballistic calculator gives 1.99 mils for 100 yds and 7.52 mils for 200 yds. MOA base only come to play with its thickness when measuring the scope to bore centerline distance . The 30 MOA base just basically gave me 30 MOA ( or 30/3.438= 8.726 mils) additional elevation adjustment on my scope for longer range.

Thank you for the step-by-step instructions and the explanation.

I’ve always used StrelokPro on my iPhone and the information for Igor‘s email is below the screen which I found just before reading your email.

If I open it on my laptop I can see his email without scrolling up. I just could never find it under the settings which is typically where you would contact the source of the app ownership.

Igor responded and we are all set and good to go. I just put in a scope similar to what I have with the same tube diameter and objective and reticle. Like everyone suggested after the fact. Or before the pack fact I guess.

Anyway … thank you kindly and hope you have a great day.

 

[std7mag]

Where is that written?

It's in Streloks user manual.

 

[Newhouse]

Thank you for the step-by-step instructions and the explanation.

I’ve always used StrelokPro on my iPhone and the information for Igor‘s email is below the screen which I found just before reading your email.

If I open it on my laptop I can see his email without scrolling up. I just could never find it under the settings which is typically where you would contact the source of the app ownership.

Igor responded and we are all set and good to go. I just put in a scope similar to what I have with the same tube diameter and objective and reticle. Like everyone suggested after the fact. Or before the pack fact I guess.

Anyway … thank you kindly and hope you have a great day.

Glad to hear that you got it sorted out. Enjoy your CZ.