W231 and 9mm 115G XTREME and FMJ's any suggestions as to loads?

[Dida]

I have been reloading for 10 years....all pistol rounds- 9mm, 40 and 45's.... for my 9mm I have used Unique, Bullseye and Titegroup....I have a good amount of W231 that I would like to start working off.

I cant seem to find any good data using 115G XTREME or RMR FMJ and W231...

Any quidance, direction or advice as to what is being used would be helpful....

 

[GLShooter]

Hodgdon has it on their Reloading area. Use lead bullet data for Extreme/Berrys

 

[kenhwind]

It is probably safe to use data for any 115 grain FMJ for the RMR bullet, these bullet shapes are so close that there shouldn't be an issue. I wouldn't load max until I have a load I felt was okay.

Speer has data for the 115 FMJ and W231

Handgun Data

Speer Ammo

www.speer.com

https://reloadingdata.speer.com/downloads/speer/reloading-pdfs/handgun/9mm_Luger__115_rev1.pdf

 

[seagate]

Winchester 231 same as hodgdon hp38 same powder

 

[bozo699]

I have been reloading for 10 years....all pistol rounds- 9mm, 40 and 45's.... for my 9mm I have used Unique, Bullseye and Titegroup....I have a good amount of W231 that I would like to start working off.

I cant seem to find any good data using 115G XTREME or RMR FMJ and W231...

Any quidance, direction or advice as to what is being used would be helpful....

RMR may have some data on there site, I have used it in the past.
Wayne

 

[GotRDid]

From Hodgdon’s Load Data site: