SOLD Variable Speed Power Neck turner for 6ppc/+30br case heads lower price

[Larry Koch]

Brand New.
0-135 RPM has < .001 run out at the end of shaft base. Small rifle, 120volt, All PMA fittings. Base unit is 13"x 7" about 8" tall.
$450.00 plus $25.00 for shipping and insurance. conus.
lower price to 400.00: Plus 25.00 for shipping.
375.00 Plus 25 for shipping
370.00 shipped conus
300.00 shipped conus.
Thanks for looking,

Larry

 

[Larry Koch]

Sorry my pc didn’t want to corporate. If you want a live video pm me.

 

[spike-55]

what does this turn????
inside id??
outside od??
overall length??
chamfer inside/outside neck??/
are there other parts not shown??
you should post the video showin operation???
stan

 

[natdscott]

what does this turn????
inside id??
outside od??
overall length??
chamfer inside/outside neck??/
are there other parts not shown??
you should post the video showin operation???
stan

Look at it, Stan.

It's a case turning motor. It will help do anything you can to the front of a case, with less arthritis.

 

[Larry Koch]

what does this turn????
inside id??
outside od??
overall length??
chamfer inside/outside neck??/
are there other parts not shown??
you should post the video showin operation???
stan

It will Neck turn any case with a ppc or br case head and a small primer. You can purchase more options from PMA reloading.

 

[spike-55]

Look at it, Stan.

It's a case turning motor. It will help do anything you can to the front of a case, with less arthritis.

thanks Nat
that's what i thought. i just wondered if there were more tooling involved that he wasn't showing lol.. at my age and with the power that thing possesses anything that is handheld and gets in a bind will do more damage to a wrist than arthritis ever thought about!!!! i got more handheld brands of turning stuff than you can shake a stick at much less name lol - i shoud probably take a chance lol
stan

 

[Larry Koch]

Lower price to 300.00 shipped.

 

[Larry Koch]

Up

 

[Rick300]

So why is it limited to 135 rpm? The motor label indicates it will go much higher

 

[spike-55]

it's a variable speed. the reostat controls the speed of the motor. you don't want to be turning cases at much more than 135pm. lots of heat and other issues can occur is you are going too fast!!!
stan

 

[spike-55]

OK Larry - send it to me!!!!
I will send you a PM with the details
stan

 

[Larry Koch]

The faster the final drive, the bigger the motor needs to be, also there is no counter rotation resistance when tightening the brass in shell holder. So there is a balance. I want it so that it's lite, and can be carried to the range if needed.
Note it works great with a PMA neck trimmer or a Neilson Pumpkin. And other similar neck trimmers.