Trigger ???HELP???

[dtucker]

Well, I was digging through some draws and going through my gun stuff and found something that i forgot i had. ??? I found 2 jewell triggers and a very-very old Remington trigger with a wide trigger and the safety on it that is wide also. Yahoo i could not believe it and it was like finding gold. As myself and i know some of you also finding these stem back to my hoarding days. Yea, at 1 time i was a hoarder of reloading equiptment and many other gun related things. I love guns but i love reloading equiptment, bullets, brass and so on. I like to look at it as much as using it also. So on with the Jewell triggers. The 1 is a HVR for a Remington with the top safety and bolt release and the other only has the bottom safety. I must of pulled these off some guns in the past when i sold them. So my question is how do i tell with the 1 with the bottom safety if it is a HVR or the bench rest trigger. Is their some marking on the side plate that would desinate it if it where a bench rest trigger. I hope someone out their can help me out on this. Thanks to all my hoarding friends out their..... DAN....

 

[butchlambert]

They didn't put safeties on BR triggers.
Butch

 

[Eddie Harren]

They put safties, both top and bottom, on Hunter BR triggers. 1.5-2 Oz.

 

[LarryDScott]

The BR series is only adjustable fro 1.3-3.0 oz with no safety provisions. Bolt release provision only.
The HVR series is adjustable from 1.5oz -3.5 lbs and is available w/out a safety or you can have a safety on the right or left, top or bottom. You can also have it w/o the bolt release. The HVR can have no options and it will look exactly like a BR model.

I stock all models. www.greatscottshooter.com Larry in western Ky.

 

[dtucker]

Thanks for the help guys. It is much appreciated.