One way to improve the Savage Bolt Lift; is get a Nate Lambeth Bolt lift kit,It will lighten bolt lift up to 50 percent,enables you to set/adjust fireing pin strike.Helps eliminate flyers one gets w/Savages sometimes do to Bolt Torque.cost is only about $35 ea. plus shipping.I bought 3 of em.Well Worth the money.
Timing Savage actions
- Thread starter ARshuter
- Start date
I suspect there is four or maybe five people that produce these kits and services, I don't know a lot about action timing, but I do understand friction and the benefits of polishing parts that are in contact with each other.
Rather than shipping my bolt to someone I would rather learn how to do it myself gaining knowledge is always s good thing.
Rather than shipping my bolt to someone I would rather learn how to do it myself gaining knowledge is always s good thing.
On a positive note , I can tell you that Fred Moreo is THE foremost authority on All things SAVAGE ! I can also tell you that when Fred times and true's your action there is an unbelievable difference in the action from bolt lift , extraction , etc .........its really easy for some to bash Fred and Lisa but I can tell you from my own experience that they are absolutely wonderful people and do EVERYTHING in that shop by themselves and that is a tremendous amount of work ! ! Until you've tried running a shop yourself, with the volume of work they deal with , probably best to stay off the high horse ! I agree some things could be handled a little differently when looking in from the cheap seats but any and all work I could ever want or need done, that I wasn't equipped to do myself, with a savage would go to Fred Moreo ! ! I don't care how long it would take ! ! And as far as thinking the .357 case and the bearing are concerned , that has NOTHING to do with the machining needed for "Timing" the action. Thats done cnc , by only Fred and last I spoke to them it was only done so often given the set up time needed so I imagine it could take some time to get them. Mine took 4 months and I was not dissatisfied in any way ......it was a very special project and didn't disappoint !
Terry
Gold $$ Contributor
Link did not work.
I found your can do a lot with timing with the bolt handle .
That's the one! I couldn't remember his name.
Savage PTAs or any mass produced actions are just that, mass produced.
And just like small block chevys, hair dryers and toasters- some of them work better, some of them work not as great, but most of them work pretty well.
And as with anything else there are people who sell a product/service that claims to make them better.
Some are a little better than others.
I've worked with Sharp Shooter Supply (Fred) and Stockade (Kevin), have read with interest some of Mr. Lamberth's posts but have never worked with him.
SSS may be the pinnacle of Savage tech but their communication and customer service is lacking to say the least, as is often attested to.
Stockade has been great to work with, would recommend them without hesitation.
The Savage bolt is a pretty simple design, take it apart, put it together, see how it operates, smooth out the cocking ramp etc, may be something you can do at home.
Or you lay down your money and you take your chances.
And just like small block chevys, hair dryers and toasters- some of them work better, some of them work not as great, but most of them work pretty well.
And as with anything else there are people who sell a product/service that claims to make them better.
Some are a little better than others.
I've worked with Sharp Shooter Supply (Fred) and Stockade (Kevin), have read with interest some of Mr. Lamberth's posts but have never worked with him.
SSS may be the pinnacle of Savage tech but their communication and customer service is lacking to say the least, as is often attested to.
Stockade has been great to work with, would recommend them without hesitation.
The Savage bolt is a pretty simple design, take it apart, put it together, see how it operates, smooth out the cocking ramp etc, may be something you can do at home.
Or you lay down your money and you take your chances.
PTG also makes one that they refer to as a Lambeth. They call it the Savage Bolt Accessory Kit w/o handle, in their catalog. I installed one but don't notice much of a difference.
I run a bolt handle from extreme hardcore gear, I believe it's a tad longer increasing leverage.
I'm also interested in polishing the cocking ramp and rear bolt baffle as well as installing Kevin's small disc with the ball bearing however to make that as effective as possible I believe shortening the BAS to match the disc thickness is in order.
Do you think I'm on the right track?
He ground my fireing spring to help with bolt lift
That took away my lock time
The handle moves on the body wher it is placed when tight effect the timing
That took away my lock time
The handle moves on the body wher it is placed when tight effect the timing
He ground away the outside surface to make the spring weaker that effects the bolt lift
I see"
Does that not create light strikes?
Ever time and slow lock time
yep Fred does great work.
i sent him a dual port savage target action. had it timed and trued, evolution trigger and bedded into his dog tracker stock. that bedding was a work of art and the action cycled like a different action. the only savage trigger that i have been pleased with.
Fred is a true craftsman. you can't rush perfection. Comunication with them was very easy. they did everything i asked
and the proof is on the target.
There's no question regarding SSS qualityyep Fred does great work.
i sent him a dual port savage target action. had it timed and trued, evolution trigger and bedded into his dog tracker stock. that bedding was a work of art and the action cycled like a different action. the only savage trigger that i have been pleased with.
Fred is a true craftsman. you can't rush perfection. Comunication with them was very easy. they did everything i asked
and the proof is on the target.
I have had SSS chamber a number of barrels and they all shoot fantastic!
I have also had Fred T&T my PTA as well as install an evolution trigger. Couldn't be happier! I had some one else T&T another PTA and it came back better, but not as good as Fred's.
No matter how many folks complain, I have dealt with Fred's wife many times and have been treated fairly.
Only problem is some time they get backed up and time drags. Only time they took a long time for me was once when I told them it was not a hot item and they could use it for fill work. No complaints here!
I have also had Fred T&T my PTA as well as install an evolution trigger. Couldn't be happier! I had some one else T&T another PTA and it came back better, but not as good as Fred's.
No matter how many folks complain, I have dealt with Fred's wife many times and have been treated fairly.
Only problem is some time they get backed up and time drags. Only time they took a long time for me was once when I told them it was not a hot item and they could use it for fill work. No complaints here!
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.