Tested IMR4166 in Dasher

[JamesnTN]

I have loads loaded up for my 6 Dasher with this powder starting at 32 grains going up in .3 grn increments to 33.2 and last load is 33.4
I'll be doing my tests at 500 yards once the wind dies down here and temps stays reasonably warm preferably above 50*

Bullet being used is the Berger 108 and I'll get all the other technical data such as COAL for you guys once I test. I don't really measure this as I measure the depth of my seating stem on my inlign die.

These shots I'm testing will be from fresh annealed brass from a Krieger 8.5 twist at 28" with a .268 neck and loaded round measuring .266

 

[JohnMill]

Could not find any 6 Dasher on ReloadersNest dot com. Do you have another reloaders nest?

Thanks
John

 

[Terry]

Jay

Thanks for sharing!

 

[JohnMill]

Graf&Sons has got it. 1s and 8s.