Teslong bore scope ?

[rebs]

I must be doing something wrong, the image are blurry and seem to have a reflection in them. Can anyone give me any help or advice to use my borescope better ? These pics are from my Remington 22 cal rifle

 

[itchyTF]

Did you try unscrewing the mirror a little for focus? Did you get a spare red mirror with yours? It’s different from 45 deg (can’t remember if it’s more or less) but it reduces the glare.

 

[Walt Krafft]

Adjust the mirror for focus.

 

[JMayo]

There is going to be reflection. Just look at the places you can see.
The top pic looks good.
I used a 22 bore guide in all my rifles with my tesslong rod

 

[jelenko]

There is going to be reflection. Just look at the places you can see.
The top pic looks good.
I used a 22 bore guide in all my rifles with my tesslong rod

This^
Also, you can rotate/move the mirror in the bore to see spots that have a relection.

 

[rebs]

Thank you I will try adjusting the mirror for focus.
From what you can see how bad does the bore look ?

 

[drop_point]

You may also turn the light down. I find my scope works best if I brighten the computer screen with a dimlit scope.

 

[jelenko]

Thank you I will try adjusting the mirror for focus.
From what you can see how bad does the bore look ?

I've only looked at centerfire bores. If it were a centerfire bore, the bottom pic looks pretty clean. The top pic looks like there's a layer of carbon in the grooves; for shooting 2 MOA 10 rings, it's fine in the centerfire barrels I've looked at.
The middle pic looks like a lot of carbon. Is that the throat? Does the black go all the way around the bore?

 

[rebs]

I've only looked at centerfire bores. If it were a centerfire bore, the bottom pic looks pretty clean. The top pic looks like there's a layer of carbon in the grooves; for shooting 2 MOA 10 rings, it's fine in the centerfire barrels I've looked at.
The middle pic looks like a lot of carbon. Is that the throat? Does the black go all the way around the bore?

Yes the carbon ring goes all the way around. There is also some carbon in the grooves. The first picture is the throat.

 

[Patch 76]

Sounds crazy, but i had the same issues. I simply cleaned the mirror. My ham hands had crap all over it. Made a big difference, and what Itchy said.

 

[jelenko]

Yes the carbon ring goes all the way around. There is also some carbon in the grooves. The first picture is the throat.

Where is the carbon ring? In centerfire they are at the very beginning of the throat.
If it were centerfire, we would get the carbon ring out - many of us use JB, Iosso, Flitz bore polish. But, no experience with 22's - other than I never clean mine and haven't looked in the bore. [Not recommending that, just saying]