• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Target camera system

BullseyeCamera said:
Regarding the detecting hits in the black targets - our cameras have night vision (infrared) and we have had great luck putting a piece of electric tape over the little sensor and "forcing" the camera to turn on the PIR lights - then the shots in the black show up glowing. Try that and see if that helps!

I wish I would have known that before I returned the one I had!
 
BullseyeCamera said:
Punkinslinger said:
I have always had trouble with my bullseye not syncing, always searching and attempting to sync past 500 yards with weak signal strength. I purposely bought the 1K model. Any particular model number Yagi ? Or db rating ? Just to clarify, this antenna is attached in place of existing short white antenna and aimed back at laptop ?

If you are having issues @ 500 yards, it sounds as if something may have been damaged with the system - why don't we swap you with a new system (free of charge of course) to resolve this problem. Always call our office 541-357-7035 if you have any sort of problems or concerns with our system, we are here to help and we staff our office with educated people and shooters that are there to help. If you want to E-Mail support@bullseyecamera.com we can get that swapped for you right away - we will send a prepaid shipping label to send the old kit back AFTER you receive the new one, so you won't be without a system.

Just a quick note to bring everyone up to speed. I did call the Bullseye factory, they were very courteous and asked a few questions on how it was operated, set up, I'm guessing just to make sure i was doing everything right on my end, can't fault them for that. A brand spankin new machine will be in my possession next week. Now that is excellent customer service !
 
NoahbodyImportant said:
BullseyeCamera said:
Regarding the detecting hits in the black targets - our cameras have night vision (infrared) and we have had great luck putting a piece of electric tape over the little sensor and "forcing" the camera to turn on the PIR lights - then the shots in the black show up glowing. Try that and see if that helps!

I wish I would have known that before I returned the one I had!

This is something we recently discovered in our ongoing research. We can always send one back out :)
 
Bullseye guys, since you are on here I'll ask. Can a guy shoot a ladder test with this and just go through it shooting one after the other and then go back to replay the shots and plot them after you are done shooting? Or would you still have to record each shot in between?
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,433
Messages
2,195,560
Members
78,895
Latest member
BrightCut
Back
Top