806guns
Silver $$ Contributor
Well i had a slight problem when test firing. Round i fired was used in the other action and functioned fine.
I cycled the bolt with a live round and noticed zero issues.
Once i fired a round the bolt became stiff, similar to overpressure round. I havent done any measurements on the brass to see where the issue is.
I may put this on the back burner for awhile and just leave this barrel to the original action it came off of.
I cycled the bolt with a live round and noticed zero issues.
Once i fired a round the bolt became stiff, similar to overpressure round. I havent done any measurements on the brass to see where the issue is.
I may put this on the back burner for awhile and just leave this barrel to the original action it came off of.
