T3x and T3 spec question

[Infrequent Shooter]

Can someone measure the center to center distance for the receiver holes for stock attachment? thanks in advance. I have looked on the interweb a good bit and have not found the info. thanks in advance.

 

[Cloudrepair]

It is looking like 7.039 or 178.7874mm I could be a little off because of my setup

 

[Cloudrepair]

If you need me to ill disassemble it and messure it more accurately I need to anyway so maybe I'll do that anyway and check back

 

[Cloudrepair]

After disassemble I am getting 6.988
Even that measurement may be a bit off say plus or +/- .005

 

[cptjack]

measuring edge of hole to edge of hole ,as long as they are same size, is more accurate ,than trying ti guess middle of holes

 

[Infrequent Shooter]

After disassemble I am getting 6.988
Even that measurement may be a bit off say plus or +/- .005

Cloud, very helpful, friend. thanks!

 

[Infrequent Shooter]

later today, I will measure M595 and post.

 

[Cloudrepair]

measuring edge of hole to edge of hole ,as long as they are same size, is more accurate ,than trying ti guess middle of holes

That is how I got my second number plus the diameter of the hole