• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

T1X

Pyscodog

Gold $$ Contributor
Just acquired one of these in 22LR. Love the rifle, not to crazy about the stock. Will the vertical grip and wider fore-end from a T3 work on the T1X stock? I thought I might make these changes before buying another stock.
 
After I posted this I did some more searching. Seems they will fit the T1X stock just fine. Now I just have to find one.
 
You can get them in different colors also. Then take out the barrel block in the forend, fill the forend with epoxy. Makes for a stiffer forend (I've done 2 stocks, added some lead also).

Mike
 
I shot the little rifle yesterday. It seemed to like several different types of ammo. I finished off a box of CCI SV and it put 20 rounds in a group I can almost cover all with a dime. All shot at 50yds. I'm waiting on a scope base so I can use a better scope and I did a little trigger work but plan to do more and get it down a little farther. I saw the barrel block but didn't remove it yet. It shoots pretty good with it in there. I'm planning on a better stock swap but funds are tight right now so I have to make do with what I have for now. Anyone have a vertical grip and wider fore-end they want to sell?
 
I bought a grip and fore-end from a member here. Received it today and got it on. Thanks B Hocker! Also removed the barrel support in the barrel channel. While I had it out of the stock, I did a trigger jobish and got it down to right at a pound. Last time out I shot several different types of ammo and it isn't fussy at all. I changed scopes as well. Now it wears a Sightron STAC 4-20x50. I may still add a recoil pad to give it a little more length but its not bad where its at right now.
 
I shot the little rifle yesterday. It seemed to like several different types of ammo. I finished off a box of CCI SV and it put 20 rounds in a group I can almost cover all with a dime. All shot at 50yds. I'm waiting on a scope base so I can use a better scope and I did a little trigger work but plan to do more and get it down a little farther. I saw the barrel block but didn't remove it yet. It shoots pretty good with it in there. I'm planning on a better stock swap but funds are tight right now so I have to make do with what I have for now. Anyone have a vertical grip and wider fore-end they want to sell?
If the rifle is shooting that well with the factory stock IMO rather than buying a different stock try some higher grade ammo. At the price of an aftermarket it is a lot of money for a little, or no, gain in accuracy.

There is some merit in the old saying -"if it ain't broke don't fix it"

Or more aptly put - "if it ain't broke I can fix that"

drover
 
....Anyone have a vertical grip and wider fore-end they want to sell?

They're available on Beretta's website


My T1X is one of the best shooters I have (and I have a few). I do have the vertical grip but it's not currently on the rifle because I was using is for ARA factory class. I didn't do the wider forend because it didn't seem to add much and my gun shoots really well from a bipod. I've never bothered to take the "shoehorn" in the barrel out. It shoots so well I've just left it in. Most that remove it say the gun didn't shoot any better with it out
 
I have several types of Match ammo. Not the "Best" but several types of Eley, SK, Wolf and some others. It seems to like it all. Of course some better than others of what I have shot. Still need to run some of the others through it as well. I've only had it out twice so there is plenty of testing left to do. I did remove the "shoehorn" but its easy enough to put back in if needed.
 
Just acquired one of these in 22LR. Love the rifle, not to crazy about the stock. Will the vertical grip and wider fore-end from a T3 work on the T1X stock? I thought I might make these changes before buying another stock.
I just put my T1X in aT3 Routech stock. I put a arca rail on it. I got Westex to chamber me a little HM-2 barrel. Shoots great. The 60mm IR Hunter thermal may be a little bit more optic than is needed lol.
 

Attachments

  • 5E4BA333-C7FC-4169-8E51-201D7BF66FAA.jpeg
    5E4BA333-C7FC-4169-8E51-201D7BF66FAA.jpeg
    321.9 KB · Views: 26
Last edited:
I just put my T1X in aT3 Routech stock. I put a arca rail on it. I got Westex to chamber me a little HM-2 barrel. Shoots great. The 60mm IR Hunter thermal may be a little bit more optic than is needed lol.
What critters you smoking with that rig ???
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,856
Messages
2,204,344
Members
79,157
Latest member
Bud1029
Back
Top