Synthetic Remington 788 stock...where to find one?

[Wolfdawg]

I have a friend who is looking to replace his beat up and cracked wooden stock on his Remington 788 with a cheap synthetic stock.

Any recommendations?

Wolfdawg

 

[FatBoy]

Good luck finding anything cheap and synthetics. For $80, He can put a factory stock back on it.

https://www.gunpartscorp.com/products/588890

 

[Booger68]

Ramline made a plastic stock for the 788, might check on ebay, if I remember right there is 2 different action lengths,

 

[FatBoy]

I'm pretty sure there were three action lengths. From the little digging I did I found this:

Measured from the rear edge of the bridge to the front edge of the ring:

the .44 Mag is 5-5/8"
the .222, .22-250, and .30-30 are 6-5/16,"
the 243 and 308 are 6-9/16"

I didn't see mention of the 6mm Remington.

 

[a1712]

I have a friend who is looking to replace his beat up and cracked wooden stock on his Remington 788 with a cheap synthetic stock.

Any recommendations?

Wolfdawg

Brown Precision use to make one, not sure if they still do. Brian.

 

[bpd459]

Greetings,
MPI Stocks in Oregon makes several for the 788 series. http://www.mpistocks.com/index.htm
Good luck,
John

 

[Big Mc]

I have a friend who is looking to replace his beat up and cracked wooden stock on his Remington 788 with a cheap synthetic stock.

Any recommendations?

Wolfdawg

ebay if you cant fine one ,it ante made..

 

[Wolfdawg]

Thanks