Stocks to fit a Savage action?

[Scott7m]

Just looking for information on which stocks out there fit the savage action? I've been reading but there is a lot of ifs and ands and butts. haaha.....

 

[brunr6mmBR]

Try Kevin Rayhill at Stockade Gun Stocks,www.stockadegunstocks.com) I have two of them and their great!

 

[memilanuk]

Scott,

As mentioned, the stocks that Kevin Rayhill,Stockade Gun stocks) will work. They are regular fiberglass stocks w/ aluminum bedding blocks. I have one on a 10FP that has never been bedded and it shoots extremely well,well enough to place fairly well in a number of tactical matches). The stocks sold by Brownell's and Lock, Stock & Barrel are, AFAIK, Stockade stocks.

Sharp Shooter Supply used to sell Kevin's stocks under their own name; due to a dispute a while back they started selling laminated copies of the same designs.

Generally speaking, McMillan at least can/will inlet their stocks for a Savage. I would presume HS Precision would also as several of the Savage factory models use HS stocks.

Other than that... most custom,wood) stock makers offer un-inletted stocks at a slight discount so you could have a local gunsmith finish the final inletting to suit.

HTH,

Monte

 

[Scott7m]

i wonder if the edge stock from mcmillan, wonder if they have it available for the savage action, i'd like to have an edge with no paint work done to it

 

[james]

I purchased a Sharp Shooter Supply laminated stock for my Savage BVSS 243 - excellent fit and looks great with a simple Tru-Oil finish.

 

[Hammer47]

I am building one now based on the Kelbly benchrest stock with the 3 inch wide forearm for the RB/LP Competition action. It has the forearm extended by 4 inches in length for the 30/31 inch bbls. Don't know if I will produce this stock or not, just wanted to build a few for myself as there are few stocks available for the new Savage action. I will also probably build an "F" class stock too.