stock ID question

[hogpatrol]

Rummaging through the reloading room and found this stock. Just know it doesn't fit a 700 action. Hole centers are 6.061 + or -.
It has a raised pad forward of the trigger guard shown in photo. It's a BR style stock. Anyone know what action fits this? TIA Hog

 

[tac284]

I have a Bat DS sitting here that is 6.071 center to center on the action screws. I believe there are several other Bat’s that share that spacing.

 

[david kieffer]

I agree , I have a few B models I believe would drop in that stock .

 

[Dusty Stevens]

I cant see very well but does it have flats like for a multiflat or octagon action?

 

[tac284]

I cant see very well but does it have flats like for a multiflat or octagon action?

Good eye, does kinda look like flats. The way the pillar is exposed from edge to edge says it that it might be.

 

[Fast14riot]

It appears to be a round action with a flat running down the middle. What it may be, I offer no help.

 

[Gabe22BR]

Stiller TAC 30 & Predator have a cut out like that as well…

 

[Alex Wheeler]

Im going to say its a B. 1.350 wide? If so, round B with xp cut. The ejection port looks a little long for a DS which shares everything with a B other than slightly smaller ports and bolt stop location. B/DS screws are 6.062" spacing.

 

[hogpatrol]

Couple more pics. I have a BAT B multi flat and it's flat on the bottom all the way and has a recoil lug. This stock has no slot for the lug, is flat on the bottom except for the hump. The hole spacing is the same as the B.

 

[Alex Wheeler]

I can see the full length flat now. Id say its an 1.550" B. Measure the width of the bedding to be sure. Cant tell if theres a flat on the side but if there is and its 1.4 or 1.47 its a multi flat. The octagon has flat all the way around. Bat makes many configurations. You can get an xp cut like this, a bolt on lug, integral lug, or no lug on most of their actions.

 

[joshb]

Memory jog: Could it be for that Stiller you sold me? I could pull it apart and look. Been a while.

 

[hogpatrol]

Memory jog: Could it be for that Stiller you sold me? I could pull it apart and look. Been a while.

No, hole centers are different and it's multiflat..