Stick powder & V3 trickler tube

[Chiquita]

Seems like IMR4064 gets piled up and stuck inside the V3 autotrickler tube and it won't trickle out.
Anyone else with this issue and what is the solution.

Thank you

 

[AntiMedic]

If you have not tried adjusting the trickle tube up some, try doing that and see if it helps.

 

[Intell]

I cut a drinking straw down and slide it inside the tube of my RCBS auto and that helped reduce clumps a lot.

 

[Bojo]

I’m not familiar with IMR4064 , so far the only powder I have tried in mine is H4350. Not sure how the stick size compares to 4350 but I had to fiddle a bit with it.

 

[Drewel]

Try running your little hopper a little low. Just over the pick up tube.

 

[Chiquita]

Thank you all for your replies. It seems like i need to get used to my machine. I am new to the V3 family.

Trial and error, trial and error... repeat, don't give up, find the sweet spot. Then it is easy pizzy.

 

[6ShotsOr5?]

If you have not tried adjusting the trickle tube up some, try doing that and see if it helps.

I was thinking he might need less incline but if stuck I would try changing the angle in both directions. My V3 has worked well from N130 (finest) up to RL33 (coarsest).

 

[AntiMedic]

I was thinking he might need less incline but if stuck I would try changing the angle in both directions. My V3 has worked well from N130 (finest) up to RL33 (coarsest).

True, he may need to, I failed to read the stuck in the tube part. My bad. Reverse what I said though.