Stainless steel media question

[JORTZ]

I seen that for stainless steel media it says to use a water tight tunbler. I was wonder what all of you use it in. Also does it clean it as good as I've heard.

 

[people]

Thumlers tumbler. yes it works as good as they say. Just do a search and you will see hundreds of shooters will say the same thing.

 

[bigedp51]

The main page of Accurate Shooter.com has a wealth of informative articles and guides and should never be forgotten. I also have the Thumlers tumbler and it works fantastic!

Brass Cleaning with Stainless Media
Stainless Tumbling Media System Review

http://www.accurateshooter.com/technical-articles/reloading/brass-cleaning-with-stainless-media/

 

[Dans40X]

I use an RCBS SideWinder tumbler w/ dedicated drums for STM media/Ceramic Beads/HBn/NECO Moly/NECO Carnuba Wax/Un-treated CornCob/Walnut Shell-Rouge.

If you NEVER want to de-carbon another case/primer pocket.... again-STM Tumble your brass!!

 

[CZ550]

Had one for a bit, neck tension went to hell in a hand basket.

 

[Nvreloader]

I dump the brass/pins in my seperator that is placed on top of a 5 gallon bucket to sort out the pins while rinsing the brass, after removing the brass, I rinse the pins, and dump off about 3/4 of the water, then set my cottage cheese tub containing a large HD speaker magnet inside, on top of the pin pile and finish rinsing.

The HD magnet will hold all the SS pins in place, so I don't loose any more down the drain, then the bulk of the SS pins is dumped into the thumbler and the magnet is used to retrieve the rest from the 5 gallon bucket and placed into the thumbler.

Tia,
Don

 

[Hummer]

I have been doing stainless steel pin media bout five years. Wish I had found it 30 years ago. cleanest cases I ever saw including new unfired.

 

[JORTZ]

Thanks for some info I'm going to get a tumblers and use stainless