STABALL Powder

[bsekf]

Can you get enough Staball into a 223 case? How about 6BR? Or is it just too slow. Are you all using Mag Primers? I am going to get some for my 6x47L, 6.5x47L and 7-08, but I don't have any Mag primers. Looks to me as if it will replace RL16 nicely.

Bill

 

[Big Mc]

Can you get enough Staball into a 223 case? How about 6BR? Or is it just too slow. Are you all using Mag Primers? I am going to get some for my 6x47L, 6.5x47L and 7-08, but I don't have any Mag primers. Looks to me as if it will replace RL16 nicely.

Bill

I use it in my 6.5x47 Lapua CCI 200 NO problem. Tommy Mc

 

[jepp2]

but I don't have any Mag primers.

I've been using it in my 6CM and BR4's work just fine in the summer. But not my favorite powder. I much prefer H100V over Staball.

 

[wkndwarrior]

This is the only ball powder I have used, but it sticks to everything that has a static charge and is a pain to clean out of my charge master. Works well in 6.5 creedmoor though and is easy to get low sd's. I've only seen 223 load data for staball with heavy bullets 77gr and up.

 

[DHuffman]

You can get plenty in a 6 br, I don't have the notes with me but easily ran a 103 up to 2950. Sorry I can't even tell you what the charge was but think it was in the mid to high 30g with no pressure.

 

[Gary in MD]

I’ve got a decent load in a 22-250 with StaBall and the 65 gr Sierra.

 

[Ray123]

Works very well on 6 Dasher 3123 fps 107 SMK 3085 fps 110 SMK 3020 115 Dtac and 308 Win 225 ELDM 2675 fps to 230 Atips 2620 fps.

 

[AndrewB]

"This is the only ball powder I have used, but it sticks to everything that has a static charge and is a pain to clean out of my charge master. "

Take a used static cling sheet out of your dryer and use that to wipe the inside of your charge master and it will solve the cling issue

 

[MUP]

I've been using Staball 6.5 in my 6.5 Creedmoor under 153 gr Atips with some success.