SS adapter for 700

[JPB3]

What is the best floor-late adapter that will feed a round thrown in like a true single shot action?

Anything out there like that ?'

Thanks !

 

[Kracken McGraw]

What is the best floor-late adapter that will feed a round thrown in like a true single shot action?

Anything out there like that ?'

Thanks !

https://www.midwayusa.com/product/1015300323?pid=220977
These are the ones you hear about the most.

 

[CJ6]

https://www.midwayusa.com/product/1015300323?pid=220977
These are the ones you hear about the most.

These are what I use. ^^^^^^^. Most are glued in.

 

[jds holler]

I custom cut and fit mine from a piece of bamboo flooring -- but I'm a horrible tight-wad who learned almost everything I know from a "Grapes of Wrath" okie. jd

 

[Kracken McGraw]

I custom cut and fit mine from a piece of bamboo flooring -- but I'm a horrible tight-wad who learned almost everything I know from a "Grapes of Wrath" okie. jd

I need to try something like that for some H&S Precision mags.
Is that product in squares or rolls?

 

[jds holler]

I need to try something like that for some H&S Precision mags.
Is that product in squares or rolls?

The stuff I had was plank flooring -- and I wish to hell that I'd have got more of it. I used to get scraps and remnants of various flooring from the installers at the business where I worked. You might try the same if you know of a place. Can't believe what goes in the dumpster. jd

 

[Kracken McGraw]

The stuff I had was plank flooring -- and I wish to hell that I'd have got more of it. I used to get scraps and remnants of various flooring from the installers at the business where I worked. You might try the same if you know of a place. Can't believe what goes in the dumpster. jd

Thanks, I will check with a few contractors I know.

 

[expiper]

I Have made several from 1" schedule 80 pipe,,,I use a porta-band saw and a die grinder ,,,,you can glue it in place or set it on top of the mag follower,,,Rogrer

 

[Kracken McGraw]

I Have made several from 1" schedule 80 pipe,,,I use a porta-band saw and a die grinder ,,,,you can glue it in place or set it on top of the mag follower,,,Rogrer

Have you done it to a aics type mag.

 

[expiper]

Have you done it to a aics type mag.

no,,,,

 

[Kracken McGraw]

no,,,,

Thanks anyway!
I know they make the sleds for those, but it sure would be handy to have something to slip into a h&s precision mag when shooting off the bench. I called HS about a single shot sled mag and they just blew me off.

 

[dryhumor]

I’ve used these

PTG Bench Rest Single Shot Follower Remington 700 Short Action

Bench rest followers are perfect for competitors, varmint hunters or anyone trying to get the most accuracy possible out of their bolt action rifle....

www.midwayusa.com

In Remington 700, seems like I fit one to an Origin once. Currently have one situated in a Howa, that is a 6br. Feeds fine even if it is not quite right for it.

They were on sale a month or two ago for about $24-25 bucks, I nearly convinced myself to buy two, just in case…

 

[Fast14riot]

I have Davidson, PTG and home made. PTG are the ones with the radius to match the action and make bedding a little easier.

This is a home made one I did for a 788 6br and it feeds great.