• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Southwest Action Works Fclass stock

Bc'z

Hired Gun Painting
Silver $$ Contributor
Alright folks, I read a lot of threads on Fclass stocks what to get and where to get it.
That's exactly how this project came to be. "And in short order"
Dennis uses some beautiful boards in his builds, carbon fiber runs the length 4-6 layers.
I see a lot of stocks that are set up off center and it shows on action screws and the outer boards.
Not on a Southwest Action Works stock, absolutely perfect and parallel.
Maple burl live edge with a copper epoxy fill, curly maple and wenge.
Not wanting to go dark on this I used copper, vintage amber, orange, and a cherry red wash coat, followed with the extremely popular Rootbeer and pagan gold.20231116_114842.jpg20231116_114917.jpg20231116_114957.jpg20231116_114830.jpg20231116_114814.jpg
 
Alright folks, I read a lot of threads on Fclass stocks what to get and where to get it.
That's exactly how this project came to be. "And in short order"
Dennis uses some beautiful boards in his builds, carbon fiber runs the length 4-6 layers.
I see a lot of stocks that are set up off center and it shows on action screws and the outer boards.
Not on a Southwest Action Works stock, absolutely perfect and parallel.
Maple burl live edge with a copper epoxy fill, curly maple and wenge.
Not wanting to go dark on this I used copper, vintage amber, orange, and a cherry red wash coat, followed with the extremely popular Rootbeer and pagan gold.View attachment 1494205View attachment 1494206View attachment 1494207View attachment 1494208View attachment 1494209
Just drop the damn mic and walk off the stage!
 
Guess I’m going to have to get caught up on the barrel work so I can get you that Shurley Bros. stock we talked about. You keep posting these works of art and I may move myself to the front of my line!:cool: G
 
Last edited:
Guess I’m going to have to get caught up on the barrel work so I can get you that Shelby Bros. stock we talked about. You keep posting these works of art and I may move myself to the front of my line!:cool: G
Get it bedded!!
Elcomino gets sprayed today, should be back to 3 week lead times.
I know what your saying there.
I've been pushing my wife's stock off to the side
I need to get it done then have Dennis do a 3D scan of it.
 
Alright folks, I read a lot of threads on Fclass stocks what to get and where to get it.
That's exactly how this project came to be. "And in short order"
Dennis uses some beautiful boards in his builds, carbon fiber runs the length 4-6 layers.
I see a lot of stocks that are set up off center and it shows on action screws and the outer boards.
Not on a Southwest Action Works stock, absolutely perfect and parallel.
Maple burl live edge with a copper epoxy fill, curly maple and wenge.
Not wanting to go dark on this I used copper, vintage amber, orange, and a cherry red wash coat, followed with the extremely popular Rootbeer and pagan gold.View attachment 1494205View attachment 1494206View attachment 1494207View attachment 1494208View attachment 1494209
How do you wrap these stocks to prevent damage during shipping? Just wondering.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,292
Messages
2,215,954
Members
79,519
Latest member
DW79
Back
Top