• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Soft 6br Norma brass

Pareto said:
I know that the 6mm BR brass from Norma has a reputation for being soft. But I was surprised that about 20 of my cases shot 3x to 4x each were so soft after annealing and full length resizing that there was only minimal neck tension. In all cases, the slightest push would lead to the bullets going deeper into the case. So depth adjustments are pointless. Do I have no option but to trash this brass? Or is there a simple way to save them for a couple more uses?

Thanks.
Click to expand...
My Norma BR brass is annealed on an AMP. I use standard Redding dies - no bushing and no decapper or expander ball. A mandrel sets 1.5 thou tension. I have 15 plus loads and still using them - I plan to fire form some to BRX and use them for load development, as I have just replaced them with Alpha for this season. I have lost very few of the Normas in 2 seasons.
 
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,824
Messages
2,204,324
Members
79,157
Latest member
Bud1029

Share This Page

Back
Top