Single stack Magazine

[NCVarhtr]

Does anyone make a single stack Magazine for a Defiance Deviant action ? I have one in 6Gt and the way the rails are cut, it will not feed at all. I've tried several followers and nothing even comes close.

 

[PatMiles]

Call Defiance?

 

[ShtrRdy]

What is the magazine you have designed for?

 

[NCVarhtr]

I don't have a magazine. Its a standard load from the top magazine well. the rails are very narrow and after trying several different size followers, none of them work. I thought maybe someone might make a flush two or three shot magazine in a single stack .........

 

[ShtrRdy]

Okay, so it sounds like you have an internal magazine box in the stock? Perhaps with a BDL type of door on the bottom? What cartridge was the magazine box made for? How long is the inside of the magazine box?

 

[NCVarhtr]

Correct----BDL with floor plate. Standard short action with a model 7 footprint.

 

[ShtrRdy]

Sorry that we have to ask a thousand questions to figure this out.

1. What cartridge was the mag box made for?

2. Do you load ammunition cartridges by placing on top of the follower and pressing down?

3. Can you describe the feeding failure? Maybe include a picture of what position the cartridge is in when it stops feeding?

 

[X Count]

HS precision, Kwik klip do bottom metal with proprietary mags. HS Is very nice but expensive.

Atlasworks (and probably a few others) do a drop in for a rem BLD that will take AICS centre feed mags. Combine it with a flush MDT mag and you should be golden

 

[NCVarhtr]

Thanks guys for all the great suggestions. I have some direction now to work with. Merry Christmas to all. Stay safe and be well.

 

[nksmfamjp]

Doesn’t Wyatt’s make a BDL centerfeed as well as AICS.

 

[NCVarhtr]

I'm going to call
AICS and discuss it with them. I'm not sure about Wyatt....Thanks for the suggestion...

 

[cheek9075]

Wyatt make a center feed for a 223. Allows you to shoot longer oal in heaver bullets and still be able to feed from mag. I have some issues with feeding rounds. Fast and hard feeds fine. Moving slow however does work.

 

[NCVarhtr]

Actually I'm looking for a magazine that I can remove the follower and spring that is in it now, and insert a complete "unit" that is help in place by he floor plate.. Single stack...If it only holds two rounds, that fine with me.