SEB NEO HANDLE

[JerryP]

Does anyone make a shorter handle for the Neo?

 

[rardoin]

There are two handles, a short and a long. If you are certain your handle is the short (standard) length I am unaware of anyone making them shorter than that. However, it would be an easy task to cut it down to length and either cut new threads for the ball (if you had access to a lathe with a decent spindle bore to accommodate the bend at the collet end) or score the end to make irregularities for an epoxy to grip and drill the ball to match the rod diameter and epoxy in place.

 

[woodbooger]

i have shorten a seb handle.they are not threaded.glued on.easy to do.

 

[rardoin]

^^^^^
There you go. Only need a hacksaw and adhesive. Easy peasy

 

[JerryP]

Sounds easy. How does the plastic ball come off without damage.
Thanks

 

[rardoin]

Heat up the handle in front of the ball with heat gun and it should twist off.

 

[carlsbad]

I have a short one. I'm looking for a long one. I'd like one 17-18" long. --Jerry

 

[JerryP]

Thank you for the help.

 

[Rope2horns]

I have a short one. I'm looking for a long one. I'd like one 17-18" long. --Jerry

Contact Ernie Bishop....SEB offers a 19" handle.

 

[carlsbad]

Contact Ernie Bishop....SEB offers a 19" handle.

Been on the wait list for months for a long handle.

 

[Liven The Dream]

Saw a extended handle last week ?

Cut original 3-4" in front of Ball made a shaft to press fit into original tube and Drilled and add a roll pin ?
Jerry with your shop ! snap .

Don

 

[JerryP]

Thank you for all the help. I have another question. Does anyone know what threads are on the lock down levers on the side bag plates?
Thanks.

 

[WillyTP]

Thank you for all the help. I have another question. Does anyone know what threads are on the lock down levers on the side bag plates?
Thanks.

If your talking about part #41 it’s M6-1.0.

 

[rardoin]

Thank you for all the help. I have another question. Does anyone know what threads are on the lock down levers on the side bag plates?
Thanks.

If you broke one, like I did, I bought replacements levers in optic orange from MSC that are of a tougher plastic.

 

[JerryP]

Thank you guys for all of your help.

 

[F Class John]

If you broke one, like I did, I bought replacements levers in optic orange from MSC that are of a tougher plastic.

Yep and McMasterCarr has metal ones too.

 

[seb]

Shorter or longer than standard joystick is available on request.
(Current standard length is approximately 13.5 inch / 33 cm )
Ernie has some longer sticks (4" and 8" longer than standard) in stock.
Hope this help,
seb
www.sebrests.com