dbramley
Dan Bramley
So I made some snap in type holders to attach my handle to my rest, they were quite crude but despite this, many asked me to make them a set (who says no to Mid Thompkins, right?). I ended up making several sets, but making one off custom parts got old fast!!! So I drew up a solid model and emailed it over to my friend Bryan Blake at Blake Machine shop here in Phoenix. Below is the results. CNC cut delrin Handle holders.
No more leaving your handle in that cart, leaving your handle in the truck, or worse off leaving your handle at home. There is no better way to cripple someone than to be ready to shoot and not have a handle.
This device uses existing holes and has an anti rotational ridge to prevent rotation.
Jim Murphy put a set on his 1st Gen Seb Neo (the one without the rotating base) no issues.
Cost $60+7 shipping in the US, or actual cost abroad. Or if you want, I will have a bunch at the Berger Southwest Nationals here in Phoenix.
Email me for more info etc.
dbramley@yahoo.com
paypal, check, money order
See Madison in action here:

No more leaving your handle in that cart, leaving your handle in the truck, or worse off leaving your handle at home. There is no better way to cripple someone than to be ready to shoot and not have a handle.
This device uses existing holes and has an anti rotational ridge to prevent rotation.
Jim Murphy put a set on his 1st Gen Seb Neo (the one without the rotating base) no issues.
Cost $60+7 shipping in the US, or actual cost abroad. Or if you want, I will have a bunch at the Berger Southwest Nationals here in Phoenix.
Email me for more info etc.
dbramley@yahoo.com
paypal, check, money order
See Madison in action here:


