Went to the range today to sight-in and shoot some groups. No wind to speak of. When I got sighted-in at 100yds. I started to set my windage barrel to zero. I noticed that my windage was set past 1/2 of usable range. In other words, if I have 7 turns total windage adjustment, my zero is around 5 turns. 1 piece Picatinny base, steel rings. Could the torque on the ring mount bolts effect windage that much? I used a torque wrench to tighten fasteners.
Scope windage zero
- Thread starter medic727
- Start date
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.