Too thick!! Scotch Tape should do the trick. Only a small piece on either the top or bottom ring half. If using rubber cement, etc. just a small dot should work very well. That way, no excess to clean up.Cut a piece of black electrical tape and stick it on the inside of your rings??
Yes, and they wouldn't have scarred your scope up.So Burris signature rings with insert will fix my problem?
So Burris signature rings with insert will fix my problem?
Leupold rings are junk. Ive seen Leupold rings fail on more than one occasion. But no ring contact is even close to perfect without lapping an bedding.
How many inch pounds are the rings torqued to?Savage .308,sightron 30mm tube, leupold rings,noticed it' moved less than 1/4 inch,screws are still tight,any ideas on how to fix it without getting different rings?View attachment 1049313
Torque to 20 inch poundsSavage .308,sightron 30mm tube, leupold rings,noticed it' moved less than 1/4 inch,screws are still tight,any ideas on how to fix it without getting different rings?View attachment 1049313