Savage tennon deminsions

[DJSBRS]

What is the tennon deminsions for a large shank and small shank Savage?

Thanks for your reply. I am in a bind here.

DJ

 

[M-61]

Does this help?


The shank diameter on Savage's standard calibers is 1.055"The Savage rifles chambered in Remington Ultra Mag and Winchester Short Magnum have a larger shank diameter. These measure 1.120"The outside of the barrel nut is the same diameter on both the standard calibers and the Ultra Mag - WSM calibers.All barrels are threaded 20 threads per inch.Note: Some of the first Ultra Mag and WSM rifles were made with the smaller diameter shank. The larger diameter shank barrels will have a step in front of the barrel nut.

 

[DJSBRS]

Perfect!

Thank you kindly.

DJ

 

[Rustystud]

Small tenon is 1" 1/16" x 20 tpi . = starting major OD diameter on 1. 0625", after threads are cut 1.055".

Large tenon is 1" 1/8" x 20tpi. = starting major OD diameter 1.125", after threads are cut 1.115".

 

[Nomad47]

I believe ALL target actions are large shank regardless of caliber. Or maybe I should say 'regardless of bolt face' since the action itself is not caliber specific.