• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

savage mark II bore guide

Between my two sons and my own, we have three Mark IIs. Since I could not find a decent one I turned and milled a drilled delrin rod to have the same bottom profile as a bolt. You could also probably start with a Sinclair bore guide for a 40X rimfire and then go at it with a dremel. The 40X guide starts fine but then hits internal bumps that stop it.

epmn
 
Ok, thanks. I will see if stoney still makes them. I even called Savage and they said they don't use a bore guide, just stick foam cleaner down the barrel and wipe out. Hmmm. Being a long range shooter, I would still feel better with a bore guide.
 
Call Sinclair International @ 1-800-717-8211 or go to www.sinclairintl.com They will custom make them if they don't have them in stock. They are a nice bore guide and only about $18.00
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,847
Messages
2,204,845
Members
79,174
Latest member
kit10n
Back
Top