Sako barrel

[oldman1951]

I have a Sako barrel from a L46 Action that was used for a 20 Vartarg. Factory threads..... will this factory threaded barrel fit any other action? The Sako barrel that needs an action is in .222 Rem. Thanks!

 

[TAJ45]

I can't quite get the drift of the wording, have read it 3x......
OK, finally got it. The takeoff is looking for an action and is in .222.
I needs another cuppa Joe.

 

[Stan Taylor]

Yes it will fit L-461 plus A-1 Sako action.

 

[oldman1951]

Yes it will fit L-461 plus A-1 Sako action.

I thought Winchester may have had the same thread at one time.

 

[Stan Taylor]

I thought Winchester may have had the same thread at one time.

Winchester is 1 inch 16 tpi your shank is about .865 od I would have to check my books.

 

[Stan Taylor]

P.S. what I told you is pretty much what it is not much of anything else is compatible with what you have.

 

[oldman1951]

P.S. what I told you is pretty much what it is not much of anything else is compatible with what you have.

Stan, where should I look for an action that will work. Sako is all new to me

 

[Stan Taylor]

Stan, where should I look for an action that will work. Sako is all new to me

I will go an check my books an see if there is anything compatible.