Ruff’s Precision rings, ever use them?

[nakneker]

I typically use NF or a Hawkins rings on my rifles with a rail. Saw these and I like the design, I like where that level is at. Ever use a set? First time I’ve noticed them. If you have used them or are using them, what did you think?

35mm Co-Linear Integrated Bubble Precision Riflescope Ring Set

Ruff's Precision Manufacturing 35mm precision riflescope ring set with built in co-linear bubble level. Built in level is visible from the shooting position with the shooters' non-dominant eye for quick reference prior to the shot. Level significantly aids in accurate scope mounting by giving...

www.rpmflg.com

 

[nakneker]

Looks like they there isnt too much experience with them good or bad. I’ll try a set and see…

 

[boltfluter]

I typically use NF or a Hawkins rings on my rifles with a rail. Saw these and I like the design, I like where that level is at. Ever use a set? First time I’ve noticed them. If you have used them or are using them, what did you think?

35mm Co-Linear Integrated Bubble Precision Riflescope Ring Set

Ruff's Precision Manufacturing 35mm precision riflescope ring set with built in co-linear bubble level. Built in level is visible from the shooting position with the shooters' non-dominant eye for quick reference prior to the shot. Level significantly aids in accurate scope mounting by giving...

www.rpmflg.com

Sean,
Looking forward to your report. I like the bubble level location and the alignment notches between the top and bottom half of rings. Very nice features.
Paul

 

[nakneker]

Sean,
Looking forward to your report. I like the bubble level location and the alignment notches between the top and bottom half of rings. Very nice features.
Paul

Agreed, I’ll let you know what I think. I have a 260 AI inbound I’m gonna mount a Mark5 2-10 on that will be a hunting rifle. We have a few tags this fall, a couple quality tags, I’m wanting to use this rifle for most of those hunts. That level is nice and out of the way and easy to see from the shooting position. I have high hopes. I like the Hawkins rings but their offset level is a little snaggy coming in and out of the pack. Pic attached.

 

[Raydee]

I am really liking the look of these rings but after searching multiple forums and sites, nobody has ever heard of them. If they were a bit cheaper I would def buy a pair and try them out.

 

[Steve Donlon]

The guy that makes these, Eric, has been building custom rifles for a few years now in Flagstaff Az. He built me a few heavy target rifles. He builds a lot of high power super light weight hunting rifles too. He does it all and takes time on the details. He does excellent work. I've known him for over 30 years. He started working at the gun shop he now owns when he was in high school and has now owned the place for quite a while

 

[nakneker]

The guy that makes these, Eric, has been building custom rifles for a few years now in Flagstaff Az. He built me a few heavy target rifles. He builds a lot of high power super light weight hunting rifles too. He does it all and takes time on the details. He does excellent work. I've known him for over 30 years. He started working at the gun shop he now owns when he was in high school and has now owned the place for quite a while

Flagstaff isn’t far away from me. This is good to know, maybe I’ll stop in and see him someday, sounds like an interesting guy. I’ll post more about these rings when I get them, you never know but I have high hopes for these rings and they are made here in the USA.

Edit; I can be slow. Ruff’s sporting goods in downtown, passed by there years ago. I actually talked to the guy, I had no idea he built rifles, it was a decade or better since I was there. Makes me feel better about the rings knowing he’s the guy behind them.

 

[nakneker]

Rings arrived. They seem like a high quality product, I’ll post some pics when I get them mounted. Waiting on the rifle. I also took a pic with a Hawkins ring off set level next to them just to compare. Edges are rounded, machining seems nice when dealing with the screws. They included a torx tip. I do wish they added the torq specs but a phone call can fix that.

 

[RPMFLG]

Hey folks- just wanted to stop in and say hello. My name is Jaryd, I am one of the owners of Ruff's Precision Manufacturing, Eric is also a partner as mentioned above. Please feel free to reach out if we can provide any additional info. Truth be told- I am very new to forums but not new to the industry.

Side note regarding the torque spec question- that info is on the back of the package for your reference.

I can be reached via email at sales@rpmflg.com

Looking forward to continuing this conversation with you all.

 

[nakneker]

Hey folks- just wanted to stop in and say hello. My name is Jaryd, I am one of the owners of Ruff's Precision Manufacturing, Eric is also a partner as mentioned above. Please feel free to reach out if we can provide any additional info. Truth be told- I am very new to forums but not new to the industry.

Side note regarding the torque spec question- that info is on the back of the package for your reference.

I can be reached via email at sales@rpmflg.com

Looking forward to continuing this conversation with you all.

Just ordered a second set. You guys did a nice job with these rings. Welcome to the forum, glad you said hi!

 

[RPMFLG]

Just ordered a second set. You guys did a nice job with these rings. Welcome to the forum, glad you said hi!

We appreciate that! Have a safe week!