RPA Quadlite footprint.

[Doug Beach]

From what I read, the Quadlite has an R700 footprint. Can anyone confirm that a Quadlite will drop into a Remington stock, same action screw spacing, bolt handle location, etc.?

 

[mgdietrich]

From what I read, the Quadlite has an R700 footprint. Can anyone confirm that a Quadlite will drop into a Remington stock, same action screw spacing, bolt handle location, etc.?

Call Randy Gregory at Accuracy Unlimited. I don’t believe the bolt handle is exactly the same location. Not 100% though. Randy knows

 

[JLittle]

It’s almost a drop in. The action screw spacing is the same as a 700 Short action. Early ones have two and later ones have 4 screws. The bolt recess is close but may need attention and the recoil lug is further out. The trigger recess should work but may need opening up if using a hanger.

 

[clowdis]

The actions are the same diameter, nothing else is the same. Mine has 3 action screws, it's longer than the Remington and recoil lug is further forward.

 

[Doug Beach]

2,3,4 action screws… sounds like RPA was a bit indecisive. Thank you all for the information.