Rimfire Gallery--Show Us Your Gun

[Barrelhorses]

Steyr Zephyr II 22lr. I just picked this one up this week. It came from an enabler in TN who knows I have no self control. The Weaver Grand Slam 4-16x44 gets the call for initial testing. I like to play musical scopes so it will probably wear a few different scopes before it's all said and done.

 

[nockhunter]

I remember seeing those at Cabela's, man I wish I bought one back then.

Mike

 

[sacre]

I'm old (and old school, walnut, blue steel). Top 1932 Winchester 52 pre A, middle Browning A Bolt, bottom Browning 52 repo.

 

[redz]

Best group so far with the Bergara B14R. Shot with Lapua Polar Biathlon ammo. 5 shot @ 50 yds. Measured .452" OD. I have a V2 tuner on the way and hope to get it dialed in a little more. It is a fun gun to shoot.

 

[Toolbox-13]

Got out to the Range yesterday with the Sig P322 and my 1911-22lr.
200 rounds with the Sig and 100 with the 1911-22lr

 

[Multiracer]

Is that a CZ 457 MTR?
How does it shoot?

I have entered three ARA matches this fall. So far my best is a 1760 on an unlimited target. Noob.

 

[Ranger188]

My new CZ 457 varmint.
Changed the stock for the KRG Bravo
Added the 20 MOA rail
And added a JARD trigger

Looks promising.
First 100 rounds of 3-4 different stuff I had laying around.
The top group was the last 7-8 of SK+ I had on my bench.
The lower was some Eley
Going to try some more and different Lapua ammo.

 

[Barrelhorses]

457 Royal, Leupold 2-7x28 rimfire scope. I think it's a cute little fart and it shoots good to boot!

 

[Mt.Boy]

Just Bought this older Suhl build for my daughter. Suhl action, Don Stith stock and I think a lilja tight bore barrel. But not sure. Built by Lamon Loggins. Seems to shoot pretty good so far. Only had it out once.

 

[06 sandstone]

My two USMC 40X's.

 

[redz]

Latest .22LR. In decent shape for an old girl. 1967.

 

[5soutdoorsTX]

I have two rimfires, and both are kinda under operation at the moment.

This is what they looked like before my ADD got the best of me...

South Texas Arms PD22 with a Summit Precision Purple/Black Carbon Fiber barrel
Marlin XT-17 in the OE tupperware stock.

 

[Rick in Oregon]

Today is 10/22!
One of my primary GS killers...Clark Custom, Boyd's lam T/H stock, Douglas air-gauged barrel cut to 16.5", all Volq internals, Leupold 3-9X rimfire scope with target turrets. It's killed about 3,000 of the little alfalfa munchers over the years. My rancher buddies love it, so do I. Not so much for the squirrels though.



Winchester 9422 Mag with Lyman tang peep sight (fun walkabout rifle!).



For work out a tad farther, my Anschutz 1715 HB in 17 HMR and some rock chucks:



My rimfires greatly outnumber my CF's. Seems a guy just can't have too many.

 

[NMC_EXP]

I shoot smallbore prone with the sling. I use a Rem 40X standard barrel rifle. It is in a Freeland laminated stock and I usually use a Unertl 20X scope (I'm 73 YOA). I think I'm stuck in NRA Expert class and am unlikely to make Master.

Here is me at the Colorado Rifle Club shooting a regional. I do not have any closeups of the rifle.

 

[diyj98]

A Cooper 57M that's one of my favorites.

 

[BearBio]

Nothing great:

A Ruger M-1 carbine clone, goes with my 1943 Inland:


An "oldie", my Mossberg 22 mag "Chuckster":


My wife's 10-22 International:


And, a "plinker" I picked up and haven't shot yet:

 

[BearBio]

Nothing great:

A Ruger M-1 carbine clone, goes with my 1943 Inland:
View attachment 1606979

An "oldie", my Mossberg 22 mag "Chuckster":
View attachment 1606982

My wife's 10-22 International:
View attachment 1606983

And, a "plinker" I picked up and haven't shot yet:

View attachment 1606984

Of course, the perennial Single Six (just an OM in 22lr) and a Mark II standard auto with a Bull Barrel

 

[Barrelhorses]

How about a couple of semiauto rifles

Weatherby XXII (made in Italy)



Thompson Center Classic 22

 

[KEA208]

So, this is my first build from scratch. Bought a stripped down OEM 10/22 receiver from SAP Outfitters and went to town on my FrankenRooger.

It has a Feddersen 16.25" matte black bull barrel mounted to the OEM but cerakoted receiver (cerakote by Black Elk Customs), sitting in a Luth-AR MCA-22 chassis. It has a KIDD bolt and magazine latch plunger. From Tandemkross: the Spartan skeletonized charging handle, the Ultimate Trigger Kit w/ TK Disconnector, the Cornerstone Rotary Safety, and the "Bolt Keeper" - extended bolt lock. From Velocity Triggers is the extended mag release. The Area 419 Picatinny Rail @ 30 MOA sits on top of the receiver and a 12" Universal Arca Rail underneath. The is the Discovery 7-35x56 scope and 34mm/1.26" rings. I am going to use this for NRL22 so for weight up front is the Gray Ops M-Lok chassis weights.

First rounds through it on Friday with some CCI SV and then SK and Eley ammo.

It shot very well indeed. Better than I expected.

I am building a gun for each son, so two more to go, unless I keep this for me then there's three more to go.

This has been quite a bit of fun, but I think I dug my rabbit hole with a backhoe.

 

[Tony K Harper]

Bleiker Challenger 2. RFBR rifle. Turkish Walnut stock by Ricardo Serapio.

TKH