• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Rifle Twist in AR's?

What is the most common twist in factory made AR barrels? I have a DPMS,ATI and a Bushmaster in 223 and a R 15 in 204 which I know is 1x12. Just curious what the 223's are. Is there an easy way to find out?

Thanks....
 
yes measure it....
ss bbl common is 1/8
steel common is 1/9 commercial and 1/7 for milspec
and everything else can be found... from 1/14 to 1/6.5

tight fitting patch with a cleaning rod that turns freely in its handle. start the patch at the throat, mark the rod at the back of the receiver,mark the TOP of the rod, and the top of the handle.right next to each other,...now push till the rod rotates one full turn(mark on top of rod lines up with mark on top of handle)...mark rod at back of receiver again....the distance between the two marks on the rod is the twist...do it a gain to make sure...
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,932
Messages
2,206,373
Members
79,220
Latest member
Sccrcut8
Back
Top