Resizing and crimping

[Coyotefurharvester]

An easier learning experience, 55-60 gr bullet with a cannelure. Seat mid cannelure, work up a load. Than play with seating depth/crimping( if desired) inside the groove. You will learn about your rifle, save money using a v-max. And have a visual aid to setting up your seating die.

 

[Rocketvapor]

IF you do the neck measuring exercise I posted earlier you will see what the FL die is doing to your neck.
Shoot it up, size it down with the FL die, then size it up when the mandrel is pulled out.
Glad you got the ogive thing sorted out.

One question, what twist is your barrel, and range, that you want heavier bullets?

 

[Hidesato]

IF you do the neck measuring exercise I posted earlier you will see what the FL die is doing to your neck.
Shoot it up, size it down with the FL die, then size it up when the mandrel is pulled out.
Glad you got the ogive thing sorted out.

One question, what twist is your barrel, and range, that you want heavier bullets?

Sorry for the delay, twist is 1:7, range is potentially close to long, long being put to 500.